Hot Work
Identify and _______ ignition sources
control
I position myself to avoid ______
dropped objects,
Confirm that equipment and ______ have been inspected and fit for purpose
load
I plan work to separate ______ and _____ _______
workers, mobile equipment
fall protection
Before starting; I confirm ________ are removed
flammables
Establish and obey barriers and _______ _______
exclusion zones
Only operate equipment that I am ________ to use
Only operate _______ _______when qualified and use ______ where required
mobile equipment, spotters
_______ ______ and work materials to prevent dropped objects
Before starting; a _____ test must be completed and continuously monitored
gas
loose objects
I ______ and _____ barriers and exclusion zones
establish, obey
Establish clear means of ________ with equipment operator
communication
I tie off 100% to approved ______ _______while outside a protected area
anchor points
Cover all ________ openings within 30 feet
sewer
Consider _____ positioning
body
I never ______ under a suspended load
walk
safety devices
Validate prompt ________ capability when wearing fall protection
rescue
How long is a gas test good for?
2 hours (with no continuous activities)
I position myself to avoid ______
pressure releases or moving vehicles
I understand ____ ____ and keep hands off unless authorized
lift plans
Stay out of the equipment _______ zone while in operation
exclusion zone
Follow safe work practices when ______, ______ or ______ from ladders
climbing, descending or working