Terms and Definitions
CODR
Conventional Ordnance Deficiency Report
First Character of a Defect Code
Status Code
What shall be visible on a Crimped Type 1 Traceable Seal?
Unit Identification Code (UIC) on one side of the crimped disk/pellet and a numeric or alpha numeric identifier on the other side traceable to the individual assign the die-set.
Which Condition Code(s) utilize a yellow/orange MIL-STD-129 Tag?
A,B,C,T.
What chapter or appendix can you find information concerning Defect Codes and Condition Codes?
Appendix D
DEMILITARIZATION
Mutilation, scrapping, melting, or other action performed to prevent the further use of material for its originally intended military purpose.
Fifth and Sixth Characters in a Defect Code
Defect/Special Remarks
White powder accumulation on banding is not acceptable, true of false?
False. An accumulation of white powder (zinc oxide) on galvanized strapping/banding is acceptable.
Which Condition Code(s) utilize a Brown MIL-STD-129 Tag?
J,K,L,N.
When receiving ammunition, which chapter or appendix can you find the inspection criteria?
Chapter 4
RECLASSIFICATION
The change in material serviceability classification from one condition code to another. Changes in serviceability classification are based on safety, performance, quality evaluation, inventory management considerations, or the result of physical examination, inspection or testing.
What does a Classification Code of "A" represent?
Classification directed by NAVSUP P-801 (NAR).
Light box markings are required on non-standard packs, true or false?
False. Light (lite) box marking requirements do not apply to non-standard packs.
Which Condition Code(s) utilize a blue tag?
D
What chapter or appendix can a list of reusable containers be found?
Appendix E
SEGREGATION
The process of determining the current material condition of Suspended-Condition Unknown ammunition and separating it into acceptable groupings by type and configuration.
What does Defect/Special Remarks Code "20" represent?
Expired (shelf-life, service life, MDD, etc.).
What are the humidity indicator colors that are unacceptable for the Hellfire Missile only.
Orange, Brown, Black.
What information on a MIL-STD-129 Tag is not mandatory?
Unit of issue.
What information can be found in Chapter 5?
Storage inspections
LITIGATION
The process of presenting and resolving a dispute, in a judicial process, between parties of a formal contract.
What does Component Code "LY" represent?
Lanyard, cable, arming wire.
When is re-tensioning banding permitted?
Re-tensioning is permitted when there is a minimum 5inch long tab at the existing seal or an 18 inch or longer strap may be used as a splice. Only one splice is permitted per band.
What are the optional data elements on a 2DBC?
Nomenclature, Ownership Code, Hazard ID
An AIM-7 has been discovered with an expired MDD. Where can the information for the correct classification be found?
Appendix B