PLUMBING
Thin tape to wrap around the threaded ends of pipes to create a watertight seal.
What is teflon tape.
This is commonly a bare wire, or green wire.
What is ground?
PPE stands for.
What is Personal Protective Equipment?
SMAW stands for.
What is shielded metal arc welding?
The green hose.
What is the oxygen hose?
It holds a small amount of water to block foul sewer gases from entering your home.
What is P-Trap
This is commonly a white wire.
What is neutral?
This is the PPE that must be worn in the shop at all times.
What is safety goggles?
The minimum shade level for SMAW.
What is shade 10?
used to light an oxy-acetylene torch.
What is striker?
scrapes away rough edges and ensures a smooth fit.
What is deburring tool?
GFCI stands for.
what is Ground Fault Circuit Interrupter?
Single use hearing protection.
What is earplugs?
On a standard E6010 stick electrode the number "60" indicates.
What is 60,000 PSI of tensile strength?
The proper PSI for oxygen when cutting
What is 35-40 PSI?
Applied to copper pipe and fittings just before soldering to clean the metal.
What is flux?
specialty tool is used to remove the plastic insulation from electrical wires.
What are wire strippers
According to OSHA standards, a worker must wear hearing protection if the workplace noise level exceeds this many decibels.
What is 85 dB?
The letters "MIG" stand for.
What is Metal Inert Gas?
The proper PSI for acetylene when cutting.
What is 5-8 PSI?
The name of the large underground concrete or fiberglass container where household wastewater is collected and separated into scum, liquid, and sludge.
What is septic tank?
the title of the massive book that serves as the regional standard for safe electrical design and installation in the United States.
National Electric Code
The maximum free-fall distance allowed by OSHA before a personal fall arrest system must engage.
What is 6 feet
uses a non-consumable tungsten electrode to produce the weld.
What is TIG?
Prevents a worker from accidentally connecting an oxygen line to an acetylene.
What is left handed threads?