"G" CODES
G code used for rapid traverse?
What is G0
Used to start the spindle clockwise
M03
G40
Cancels cutter compensation
DRIP FEEDS PROGRAM
DNC
NEEDS A HOLE TO WORK
BORING BAR
The code used for linear feed (must have an F word with it?
What is "G1"
Used to turn on the coolant.
M08
G84
TAPPING CYCLE
MODE TO ADD A SHORT PROGRAM
MDI
A 60 DEGREE TOOL IS NEEDED
FOR THREADING
ABSOLUTE PROGRAMMING
G90
USED TO END SUB PROGRAM
M99
G91
INCREMENTAL PROGRAMMING
ONE BLOCK OF CODE THAT DOES ALOT
CANNED CYCLE BLOCK OF CODE
WHEELS THAT CREATE DIAMONDS AND STRAIGHT LINES
KNURLING WHEELS
INCH UNIT SELECTION
G20
The two codes that can be used to stop the machine cycle.
M1 AND M0
G17
X/Y PLANE FOR ARC CUTTING
CAN MAKE THE MACHINE HESITATE DURING A CYCLE
USING A DWELL IN THE CAN CYCLE
PUSHES MATERIAL WITH CUTTING EDGES
BROACH
G41
CUTTER COMPENSATION LEFT
TURNS ON THE SPINDLE CLOCKWISE AND TURNS ON THE COOLANT
M13
G54
WORKPIECE COORDINATE SYSTEM SETTING #1
DESCRIBES G2 AND G3
CIRCULAR INTERPOLATION CLOCKWISE AND COUNTERCLOCKWISE
HAS THE ABILITY TO RUN INDEPENDENT
LIVE TOOLS