The product of an applied force and a lever arm that results in rotation
What is torque
How are analog and digital signals different
Digital signals are 0 or 1 while analog signals are waves
How do you test if an RGB LED is a common cathode or anode?
To test an LED's polarity, use a multimeter in continuity mode. Place one multimeter lead on the longest LED lead and the other on either the R, G, or B lead. If the LED is cathode, the light will illuminate if the negative multimeter lead is on the longest LED lead; for an anode, the opposite is true.
The inability to be bent or forced out of shape
What is rigidity
What is PWM and what is its purpose?
Pulse-Width Modulation. Makes digital signals mimic analog signals to gain more control of the sensor, motor, etc.
What are the soldering steps?
1) Safety first 2) Turn on heat 3) Cook 4) Test Continuity
Voltage and current is
Voltage is the potential energy difference between two points in a circuit. Current is the rate of flow of electrons at a point
Can Raspberry Pi read analog inputs?
No but analog input modules can be added to RPi.
RPi, PWM pins can act as OUTPUT Pins AND can generate analog voltage with DIGITAL SIGNAL
Common Problems of Raspberry Pi
Corrupt installation (most updated version), Coding Syntax, Hardware Fault (rarest problem)
A 12-tooth gear is connected to a motor and drives a 36-tooth gear. What is the gear ratio and the effect on torque and speed?
3:1 (Driven/Driving)
More torque less speed
What are SCL and SDA and what do they do
Inter-Integrated Protocol to transfer data in sensors. SCL clocks data in or out of the target device and SDA is used to transmit data to or from target devices.
What should you do if you don't know something
State that you do not know, look at the manual, ask another TA, use Google