Review
What OSHA standard number that covers the construction industry?
29 CFR 1926
Extension ladders must be pitched to a ___ : ___ ratio
4:1
Top guardrail height for a working surface must be a minimum _____ in and a max of _______ in
39 min, max 45
This saying refers to U-bolts used to connect wire rope
"Never saddle a dead horse"
What are the focus 4?
Falls, Struck by, Electrocution, Caught in between
Extension ladders must extend _______ ft above landing
3 ft
The top guardrail must be able to withstand _______ lbs of force
200 lbs
Hole covers must be able to support ______ the imposed load
Twice
What does PFAS stand for?
Personal Fall Arrest System
Stairs are required after a change in elevation of ______ inches. Handrails are required on stairs after _____ or _____
19 in, 30 in, 4+ risers
Anchor points used for fall protection must be able to support how many lbs?
5000
A vertical post is required every ______ ft for a guardrail system
8 ft
When using a shock absorbing lanyard, the employee should account for roughly __________ ft to safely fall
18.5 ft
This is the expiration date of the OSHA 10 and 30 cards
Do not expire
When scaffolds are used on dirt surface, _______ must be used with the baseplates
Mudsills
The force on the body imposed during a fall must be less than
1800 lbs
Cable used for guardrails must be ________ every ______ ft
flagged every 6 ft
The harness "D-ring" should be positioned ________
Between shoulder blades
What are the hierarchy of controls?
Eliminate, Substitute, Engineer, Administrative, PPE
A competent person has what two qualities
Knowledge of the associated hazards + authority to correct the issue
Workers should not exceed what degree while working with a lanyard to prevent the "Pendulum Effect"
30 degrees
Fall protection is needed when using a ladder next to a leading edge if....
Ladder is within 1.5x ladder height
A maximum _________ inches of space is allowed when exiting a ladder to an elevated surface
18 in