PPE
What does the acronym PPE stand for?
Personal Protective Equipment
What is missing out of the Focus 4?
Falls, Electrocution, _______, & Caught in Between
Struck By
When was the Occupational Safety and Health Act signed into law?
1970
If you are welding in an area where there could be employees walking through, what should you use to protect them from potential hazards from the flash.
Welding Shields
A competent person must train employees in the erecting, moving ______ or altering of a scaffold?
Dismantling
What accompanies specific PPE to provide adequate protection for your eyes?
Side Shields
In an OSHA 10 class how many hours must you spend on Focus 4
4 hours
OSHA considers _______ to be a key element of a comprehensive safety & health program?
Hazard Recognition and Control
What is the maximum travel distance to get a fire extinguishers?
100'
All hand and power tools and similar equipment, whether furnished by the employer or the employee, shall be__________________?
Maintained in a safe condition
At what level of noise must the company provide hearing protection?
85/90 decibels
What is the minimum amount of time you can spend on one Focus 4 Topic
30 minutes
Why was OSHA formed?
To protect the safety and health of the American worker
OSHA requires the separation of at least ____ feet for storage of oxygen/fuel cylinders
20'
What is the purpose of the equipment grounding conductor in a portable tool?
Prevent shock
At what height is fall protection required in the construction industry?
6'
Why must falls be covered for a minimum of 1.5 hours in an OSHA 10 class?
Because most construction fatalities are caused by fall hazards
What must an OSHA inspector show prior to beginning the opening conference?
Credentials
If a cylinder is not in use, what needs to be installed?
Cap
Masonry wall in excess of 8 feet in height must be?
Braced
If you are required to wear industrial safety glasses, how do you know what glasses to purchases?
Z87.1
OSHA states Focus 4 topics are considered ______ in the OSHA 10hr. Construction class.
Mandatory
How long can the Outreach trainer take to submit class documentation to his/her ATO upon class completion?
30 Days
If oil and grease is on a regulator fitting or valve of oxygen, what can happen when attached?
Fire and explosion
What is Section 5(a)(1) called?
General Duty Clause