General
(1) Title of today's class is....
What is Overhead Cranes & Rigging
(7) Rated load marking is located where on the crane?
What is each side of crane.
(6) What is one of the three requirements when crane is modified ?
What is checked for new rated load, new rating displayed on crane, modification records maintained
(16) A crane which has been idle for 1 to 6 months must have a what performed prior to use.....
What is "pre shift inspection"
(24) A operator may leave the controls while load is suspended over an area accessible to people? True or False
What is "False".
(2) Purpose of today's class?
What is minimum safety guidelines or review hazards of overhead cranes.
(8)Rated load must be legible from where?
What is "the floor"
(12) Removing a safety label is acceptable? True or False
What is "false"
(17) Rope should be taken out of service if worn outside what are identified ?
What is "wires"
(21) What should remove from the sling, chain or cable before lifting?
What is "slack".
(3) Name two types of overhead cranes.
What is top running cab operated, top running pendant operated, Jib crane with hoist.
(9) Where is name & address of manufacturer located ?
What is "rating plate"
(13) Lifting people or lifting loads over people are considered safe crane operation ? True or False
What is "false"
(18) Once a rope reaches any specified removal criteria, it should be what?
What is "removed from service"
(23) Under what conditions may anyone ride the "hook" or "load"?
What is "NEVER".
(4) Name one responsibility of an crane authorized employee :
What is complete training, be evaluated by competent person, daily inspections, report defects.
(10) Where is the voltage of the crane power supply visible ?
What is "rating plate"
(14) Before removing cover plate from crane you should.....
What is disconnect power and lock out.
(19) Rope should be maintained in a well ______ condition?
What is "lubricated"
(22) Centering hook over load before lifting prevents....
What is "swinging".
(5) Name two of the four types of crane inspections (pertaining to frequency)....
what is daily or pre shift, weekly, monthly, annual
(11) On floor and remote operated cranes, where are safety labels affixed?
What is "the pendant station"
(15) Describe process to verify upper limit device....
What is "under no load, inch block into limit.
(20) What are one of the two discussed reasons for lubricating rope?
What is reduce friction and prevent corrosion.
(25) Describe testing hoist brakes...
What is "return to off after lifting a few inches off the ground.