Show:
Oxyfuel Trade Terms
Oxyfuel Torches
Oxyfuel Torch Flames
Regulators
Metal Cut With Oxyfuel
100
Also called flame cutting or burning, is the process that uses the flame and oxygen from a cutting torch to cut ferrous metals
What is Oxyfuel
100
A torch only used to cut with.
What is One Piece Cutting Torch
100
A flame burning with correct proportions of fuel gas and oxygen
What is Neutral Flame
100
A device that helps regulate pressure and flow
What is a Regulator
100
Metals that contain iron are called this
What is Ferrous Metals
200
To penetrate through metal plate with an oxyfuel cutting torch.
What is Pierce
200
A torch that can have different attachments to different jobs such as Cutting, heating, and welding.
What is Combination Torch
200
A flame burning with an excess amount of oxygen
What is Oxidizing flame
200
Reduce the high oxygen cylinder pressures to the required lower working pressures to maintain a steady flow of oxygen from the cylinder
What is Oxygen Regulator
200
Metals that don't contain iron are called
What is Non-Ferrous Metals
300
A loud snap or pop as a torch flame is extinguished.
What is Backfire
300
Name the two different types of Oxyfuel torches
What is One Piece and Combination Torch
300
A flame burning back into the tip, torch, hose, or regulator, causing a high pitched whistling or hissing sound
What is Flashback
300
Reduce the fuel cylinder pressures to the required lower working pressures to maintain a steady flow of fuel from the cylinder
What is Fuel Regulator
300
The width of the cut produced by a oxyfuel torch in metal
What is Kerf
400
The flame burns back into the tip, torch, hose, or regulator, causing a high pitch ed whistling or hissing sound
What is Flashaback
400
Which torch can be used to heat and weld with
What is Combination Torch
400
A flame burning withan excess amount of fuel
What is Carburizing Flame
400
Which regulator are often painted red and always have left-hand threads on all the connections
What is Fuel Regulators
400
The cutting process results in oxides that mix with molten iron in the metal and produce the material that is expelled from the kerf called
What is Dross
500
Soft, white stone used to mark metal.
What is Soapstone
500
Which torch can be used to cut with.
What is Both Torches - One Piece and Combination Torch
500
Which flame is needed to make a proper cut.
What is Neutral Flame
500
Which regulators are often painted green and always have right hand threads on all connections.
What is Oxygen Regulators
500
Oxyfuel can only cut what kind of metal
What is Ferrous Metals