A word describing a possible source of danger
Hazard
What is the highest someone can be on a ladder before they require fall protection?
6 feet
A class "A" fire is?
Wood, paper, and trash containing
burning embers
How often do we need to inspect our ladders?
Before each use.
What do you do when you see a hole in the floor on the jobsite?
Cover it to prevent tripping
To control bleeding, you should?
A. Apply clean and sterile dressing.
B. Apply pressure directly over the wound.
C. Elevate above the heart when possible.
D. All the above.
D. All of the above
This dangerous substance can be found in concrete and stone dust and is considered harmful at 5 microns or more?
Silica
Materials shall not be stored within _____
of a fire door.
3 Feet
Safe pitch of the ladder. For every 4 feet you extend it, it should be one foot out from the vertical surface it is being extended on.
Under OSHA, what is considered a qualified person?
"one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them"
A type of heat related illness is?
Heat Stroke, Heat Cramps, and Heat Exhaustion
What are the three components of the fire triangle?
All ladders shall be approved by?
ANSI (American National Standards Institute)
A hard hat must be worn when?
There is the potential of being struck by a falling object. There is the possibility of striking your head on something. There is a potential for an electrical shock to the head.
The potentially life-saving drug that is administered through the nose when an overdose is suspected is?
NARCAN
This is the OSHA rule that ensures every worker has a right to know about harmful and hazardous substances on the worksite.
The Right-To-Know-Rule
A Class "C" fire includes?
Electrical equipment
The top of a ladder must extend at least __ above the surface you are climbing onto.
3 Feet or 3 Rungs
As a general rule if you are ___ feet from
someone and need to raise your voice to
communicate, the surrounding noise level
is too high.
3 Feet
The key to minimizing the damaging
effects of a fracture is to
A. Immobilize the distorted member until
medical expert can assess and treat.
B. Reset bones and straighten fracture, then
wait for medical expert.
C. Leave alone and evacuate immediately.
D. All the above
A. Immobilize the distorted member until
medical expert can assess and treat.
This is a term for the safety equipment used to provide protection from hazards.
PPE (Personal Protective Equipment)
How long does the average dry chemical, wall mounted fire extinguisher have before it is empty (approximately)?
28 Seconds
The safest way to transport tools up and down a ladder is?
In a Toolbelt
Heavy items which may require lifting
should be stored at ____ height.
Waist.
The greatest cause of hypothermia is?
Reduced core body temperature
This procedure safeguards employees from the unexpected startup of machinery and equipment.
LO/TO or Lockout/Tagout
When using a chemical fire extinguisher to fight small fires, P.A.S.S. is the acronym to remember. What does it stand for?
P (Pull the pin)
A (Aim)
S (Squeeze the trigger)
S (Sweep the nozzle side to side)
This type of ladder should be used when working around energized overhead wires
Fiberglass
This is the name for a device that protects people from dangerous levels of electrical current.
GFCI (Ground Fault Circuit interruptor)