PPE
I am used to protect your face and not your eyes.
What is face shield?
Give the definition of incident investigation.
What is:
The process of identifying the underlying causes of an incident/accident?
In the event of an emergency, I am in charge of the scene.
What is Incident Commander (I.C.)?
The type of management system used by Petrojam.
What is Process Safety Management (PSM)?
Give the meaning of the acronym BLEVE.
What is boiling liquid expanding vapour explosion?
I am a type of respiratory protection.
Name the root cause analysis/incident investigation methodology used by Petrojam.
What is SOURCE (Seeking Out the Underlying Root Causes of Events)?
Name three (3) emergency assembly points located on the facility.
What is:
1) Corporate Office Car Park
2)Visitor's Car Park
3) Main Car Park
4) Loading Rack Cark Park
5) Antilles Car Park
6) Infront of the Boat House Assembly Point?
Give the definition of PSM.
What is the application of management systems to identify, understand and control process hazards to prevent process-related injuries and incidents?
I am the method used to process crude oil into its petroleum products.
What is Hydro-skimming?
Name the three (3) methods of hazard control.
What is:
1) Engineering,
2) Administrative,
3) PPE Control?
The primary purpose of an incident investigation is not to:
What is to:
1) Discipline employees
2) Embarrass management or staff
3) Judicial enquiry or trial
4) Conduct engineering review
5) Evaluate procedures or satisfy regulatory requirements?
In the event you hear the ringing of a siren or bell, stop what you are doing, turn off machinery if time permits and head to your nearest assembly point.
I will be at the assembly point given instructions, accounting for persons and reporting same to the I.C.
What is an evacuation procedure?
What is an Emergency Warden?
Name at least four (4) elements of PSM.
What is:
1) Employee Participation
2) Process Safety Information (PSI)
3) Process Hazard Analysis (PHA)
4) Operating Procedures
5) Training
6) Contractors Administration
7) Pre-Startup Safety Review (PSSR)
8) Mechanical Integrity
9) Safe Work Practices (Hot Work Permit)
10) Incident Investigation
11) Management of Change (MOC)?
An explosion caused by the rupture of a vessel containing a pressurized liquid that has reached temperature above its boiling point.
What is BLEVE?
Replace your hat if the suspension system shows signs of deterioration such as:
What is:
1) Cracking,
2) Tearing, or
3) Fraying?
Name the four steps of investigation.
What is to:
1) Control the Scene
2) Gather Data
3) Analyze Data
4) Write Report?
In the event of a fire igniting in your work area:
What is to:
1) Raise the alarm by shouting ‘‘FIRE’’ or Dial 2222 to alert the control room if a phone is accessible
2) Stay calm
3) State your name
4) State the location of the fire and what is burning?
Draw Heinrich's Theory.
What is:
Serious Death - 1
Minor Injury - 29
Near Misses - 300
Unsafe Acts & Conditions - 3000?
Foam is effective on both class B and C fires.
What is false?
Before you use your PPE, inspect it for:
What is:
1) Worn or damaged parts
2) Leaks, cracks or deformities
3) Cleanliness
4) Correct size?
I want to encourage incident reporting in my company by:
What is to:
1) Simplify reporting procedures
2) Educate the worker
3) Recognize his/her improvement
4) Respond to recommendation
5) Involve workers in finding solutions?
Name the different classes of fires.
What is:
1) Class A - Solid Combustibles
2) Class B - Liquid and Gas Combustibles
3) Class C - Energized Electrical Equipment
4) Class D - Combustible Metals
5) Class K - Kitchen (Fats & Oils)?
As a PSM element, an incident investigation report shall be prepared at the conclusion of the investigation which, at a minimum, included:
What is:
1) The date of the incident
2) The date the investigation began
3) A description of the incident
4) The factors that contributed to the incident
5) Any recommendations resulting from the investigation?
I have the potential to case a near miss, minor injury or a serious death.
What is unsafe acts:
1) Unauthorized operation of equipment
2) Running - Horse Play
3) Not following procedures
4) By-passing safety devices
5) Not using protective equipment
6) Under influence of drugs or alcohol
7) Taking short-cuts