Chapter 7
Chapter 8
Chapter 9
Chapter 10
Chapter 11
100

What section is Soldering Bushings?

701.7

100

What section is Sterilizers?

801.6

100

What is the title of section 908?

Wet Venting

100

What section is Trap Seals?

1005

100

What section is Applicability?

1101.1

200

What section can you learn about Backwater Valves?

710.6

200

What section can you learn about swimming pools?

813

200

What section is Outdoor Installations?

906.4

200

What section can you learn about Commercial and Industrial Laundries?

1012

200

What section can you learn about Values for Continuous Flow?

1104

300

Where is the section that talks about Slope?

718.1

300

Where is the section that talks about walk-in coolers?

801.3.2

300

Where is the Trap Seal Protection section?

901.3

300

Where is the Slaughterhouses, Packing Establishments section?

1010

300

Where is the Storm Water Drainage to Sanitary Sewer Prohibited section?

1101.3

400

What section?

Cleanouts installed under concrete or asphalt paving shall be made accessible by yard boxes or by extending flush with paving with approved materials and shall be adequately protected.

719.5

400

What section?

Joining materials shall be of approved type and quality.

811.3

400

What section?

Copper or copper alloy tube shall not be used for chemical or industrial wastes as defined in Section 811.0

903.2.2

400

What section?

Bladders, check valves or other type of devices with moveable parts shall be prohibited to serve as a trap.

1004.2

400

What section?

Cleanouts for building storm drains shall comply with requirements section 719.0 of this code.

1101.13

500

What section?

No cesspool, septic tank, seepage pit, or drain field shall be connected to a public sewer or to a building sewer leading to such public sewer.

714.2

500

What section?

Female plastic screwed fittings shall be used with plastic male fittings and plastic threads.

814.7

500

What section?

Vent pipes shall extend undiminished in size above the roof, or shall be reconnected with a soil or waste vent of the proper size.

905.4

500

What section?

Bottling plants shall discharge their process wastes into an interceptor that will provide for the separation of broken glass or other solids, before discharging liquid wastes into the drainage system.

1013.1

500

What section?

Roof drainage shall comply with Section 1101.12.1 and 1101.12.2.

1101.12