Gas
Type B gas vent can be used on what appliance?
appliance with a draft hood
Minimum test pressure for CPVC water piping?
125 PSI
A mercury manometer measures gas by what?
Inches W.C.
What is the maximum allowable level of carbon monoxide to discharge?
50 ppm
What is the age exception for taking continuing education?
There is none
How far away should a forced air intake be from a natural gas regulator?
10 feet
What is the maximum length of a flexible gas connector?
48 inches
4 feet
Polyethylene tubing/ LP gas may only be used where?
Outdoors/ Underground
When forming a plumbing corporation, the articles of organization must first be submitted to...
Secretary of State
NFPA 58 refers to what code?
Liquefied Petroleum Gas Code
What is the test pressure needed for low pressure gas system?
3.0 PSI for 10 minutes
What is the minimum size of a chamber vent on an oil/gas separator?
4 inches
How many inches is 1 cubic foot?
1728 cubic inches
A building owned by the commonwealth; who do they file the permit with?
State Board of Examiners: Plumbers/Gas Fitters
What is the maximum BTU's on an unvented gas appliance?
40,000 BTU's
When directly connecting CSST to an outside gas meter, what is the proper piping method?
Direct connection is not allowed
A gas burner with 1,000,000 BTU's shall be provided with what?
Proven low fire start
What is an acceptable range of PH?
6-9 PH
What insurance is required by law?
Complete operation coverage/ liability insurance
Maximum amount of hydrogen sulfide in gas
0.3 Grains
What materials would not be allowed on an underground storm drainage system?
Type M copper or SDR 35
What material cannot be used for LP?
Galvanized steel
How many gallons of water in one cubic foot?
7.5 gallons
How many days does an inspector have to review plans before issuing a permit?
30 days