IT & WORKPLACE
HARDWARE & POWER
CPU & RAM
PORTS & CONNECTORS
RAID
100

This professional helps employees troubleshoot computers, software, and other technology problems.

IT Support Specialist

100

This main circuit board connects the CPU, RAM, expansion devices, and other components.

Motherboard / System Board 
100

This CPU component performs integer arithmetic and logical operations.

Arithmetic Logic Unit (ALU)

100

This reversible, oval-shaped connector can carry USB data and, when supported, video and charging power.

USB Type-C

100

This RAID level stripes data across drives but provides no fault tolerance.

RAID 0 
200

Repeating a customer's concern to confirm you understand it demonstrates this communication skill.

Active listening 

200

This component converts incoming AC electrical power into regulated DC outputs.

Power Supply Unit (PSU) 

200

This type of working memory normally loses its stored information when power is removed.

RAM (Random Access Memory)

200

This connector is commonly used to transmit digital video and audio to a television or monitor.

HDMI (High-Definition Multimedia Interface)

200

Two 4 TB drives configured as a conventional RAID 1 mirror provide this much usable storage.

4 TB (Mirroring duplicates the data, so usable capacity equals one drive in a two-drive mirror) 

300

Before replacing a component, a technician should first perform this step of troubleshooting.

Identifying and understanding the problem

300

This acronym names the voltage-regulation circuitry that delivers appropriate power to the CPU.

VRM (Voltage Regulator Module)

300

A CPU operates at a constant 3.2 GHz for five seconds. How many clock cycles occur?

16 billion clock cycles (3.2 billion cycles per second × 5 seconds = 16 billion cycles)

300

This four-contact 3.5 mm audio plug is commonly used for combined headphone and microphone connections.

TRRS (Tip-Ring-Ring-Sleeve)

300

Four identical 2 TB drives in RAID 5 provide this much usable capacity.

6 TB. ((4 − 1) × 2 TB = 6 TB. RAID 5 uses distributed parity and tolerates one failed drive.)

400

In a team project, this role verifies whether the work meets the stated requirements.

Quality Assurance (QA)

400

This high-speed expansion interface is commonly used for graphics cards and NVMe storage.

PCIe (Peripheral Component Interconnect Express)

400

When a CPU finds requested information in its cache, this event occurs

cache hit (cache hit means the requested data or instruction was found at that cache level)

400

This seven-contact internal connector carries data between a SATA drive and the storage controller.

SATA data connector

400

This level combines striping across mirrored drive pairs and normally requires at least four drives.

RAID 10 (1+0) 

500

A technician records symptoms, troubleshooting steps, resolution, and user updates in this support record.

IT support ticket

500

Explain the difference between M.2 and NVMe.

M.2 describes physical module design, whereas NVMe is a protocol commonly carried over PCIe.

500

DDR5-5600 transfers data over one 64-bit memory channel. What is its theoretical peak bandwidth?

44.8 GB/s (5600 MT/s × 8 bytes per transfer ÷ 1000 = 44.8 GB/s, before overhead)

500

These small fiber-optic connectors commonly have a latch and are frequently used with SFP transceivers.

LC fiber-optic connectors

500

This RAID level uses dual distributed parity and can survive any two drive failures.

RAID 6