The acronym LOTOTO stands for what
Lock Out Tag Out Try Out
The three primary responsibilities of a Confined Space Team Leader
1.Verify the permit requirements are met
2. Ensure initial and continuous atmospheric monitoring is performed
3. Cancel entry if permit requirements are not met
The minimum height Graymont requires fall protection to be worn
4 feet above ground level or nearest floor.
Arc Flash Assessments must be reviewed at least once every ______ years
5 years
This needs to be filled out prior to conducting hot work
Hot work permit/hot work risk assessment
Only _______ persons shall operate cranes and Hoists
Competent
At a minimum, how often do employees need an audiogram performed
Annually
Equipment that keeps you safe
What is Personal Protective Equipment
This term is defined as a layering of atmosphere. this factor is why it is important to check all levels of a confined space with a sniffer prior to entry
Stratification
Personal locks shall be clearly labeled or tagged with what
Owners name/identity
At what height does MSHA require fall protection to be worn
No defined height
MSHA requires fall protection to be worn when there is a risk of falling
Tie off anchor points must be able to hold a minimum of _____ lbs
5000lbs
Insulated hand tools must be visually inspected and conditions documented on an assessment form at what time interval
Annually
Area within a facility in which hot work can be conducted without a permit
Designated hot work area
All slings and rigging hardware are to be visually inspected ______ use and _______ use
Pre and Post
A TWA (8 hour)sound level of ___ dBA requires the employer to enroll miners into a hearing conservation program
85 dBA.
When is the last time the Detroit Lions won a Superbowl?
HA HA !! NEVER!!!!
The three types of individuals listed on a Confined Space Permit
Entrant, Attendant, and Team Leader
The first step in the LOTOTO procedure
Notify all affected personnel
The length of time a hardhat can remain in service
5 years
Individuals must maintain ________ while using an aerial lift when transferring personnel or materials from basket to elevated work areas
100% tie off
1. Level of incident energy/ARC Flash PPE
2. Nominal system voltage
3. ARC Flash boundary
When performing hot work on objects that cannot be moved to a designated hot work area, the individual must relocate combustibles at least _____ feet from the work zone
35 feet
True or False: Graymont may perform annual inspections on their own equipment according to ASME
False: an independent and qualified contractor must be utilized
NRR stands for
Noise Reduction Rating
Name the horse won the 2025 Kentucky Derby?
Who is Sovereignty.
When feasible a mechanical retrieval device shall be set up when an entry is made vertically into a space that is ______ feet in depth or greater.
What is 5 feet
What types of ionizing radiation is referenced in the LOTOTO standard?
What is Xray, Alpha and Beta.
What Graymont standard states a person shall never walk under suspended loads
Lifting and rigging standard
These two factors remain constant when determining fall distance no matter the fall protection used
Worker height and safety factor of 3 feet.
NFPA ____ is the standard for electrical safety in the workplace
70E
A fire watch is required only when
When any of the six precautions on the hot work permit cannot be met or when extraordinary fire risk exists
The crane operator shall respond to signals only from the appointed signaler. However, the operator shall obey the _____ signal at all times no matter who gives it.
What is the STOP signal.
A standard threshold shift (STS) is a loss of hearing at 2000, 3000, and 4,000 hertz of _______ dBA. or more
10 dBA
She starred in the hit series Bay Watch
Pamela Anderson
A confined space is defined by these 3 criteria
1. Large enough to enter and perform work.
2. Limited or restricted means for entry or exit
3. Not designated for continuous human occupancy
The first step returning locked out equipment to service
Ensure all tools have been removed and all guards, safety devices and environmental controls are in place
The group of people tasked with the responsibility of being the example, voice and messengers of safety throughout the operation
HSE Committee members
The 4 factors to determine fall distance
1. Length of lanyard
2. Deceleration distance
3. Height of worker
4. Safety factor
A value of ____ ohms or below indicates good continuity in an electrical ground check
1.0 ohms or below
The category/type of fire extinguisher used in our MCC's to minimize damage to electrical systems if a fire occurs
Halon Extinguisher
If a hook throat opening is stretched more than what percentage it must be removed from service and discarded
15%
A ringing in one's ear is a commonly known symptom of _______
Tinnitus
The acronym PAPR stands for
What is Powered Air Purifying Respirators
When dealing with confined "SPACE", and by confined we mean the confinements of our solar system, what is the third planet from the sun
Planet Earth