Power Tool Study pt. 2

General Safety

100

Always wear ____ when in the shop area

Safety Glasses

200

Tie back ____ and roll up loose sleeves.

Hair

300

Remove all ____ when working with power tools.

Jewelry

400

Concentrate on your work; do not let yourself be ____ by others.

Distracted

500

Think before you act to prevent ____ to yourself and others

Injury

MOS

100

What does MOS stand for

Margin of safety

200

What is the margin of safety for most tools in our shop?

4"

300

What tool has a 6" margin of safety

Radial Arm Saw

400

What tool has a 2" margin of safety?

Sanders

500

What is used when you can not maintain the margin of safety on a power tool

push pad, push block, push stick

Tool ID

100

used to flatten a face and an edge

jointer

200

used to square ends

Raidal Arm Saw

300

used to rip boards to width

table saw

400

used to cut curves or irregular shapes

Band Saw

500

used to cut decorative ends/edges

Router

Radial Arm Saw

100

The minimum length a board can be to be cut on the RA Saw is ___________ inches. 

12"

200

Place board against this guide to make your cut. 

Fence

300

What type of cut is this saw used for?

Crosscutting

400

Which hand do you use when cutting with this tool?

Right

500

What type of cut should this saw NEVER be used for?

Ripping

Planer

100

This tool is used for:

making 2nd face smooth and parallel, getting lumber to thickness

200

Stock to be planed  must be at least _____________________  inches in length

12"

300

When using the planer, stand to the ______________________ of the machine

Side

400

Turn the lifting handle no more than _____________________   of a turn MAX, on each pass

1/4

500

What do you need to know about your board before using this machine?

The measurement of the thickest part of  your board.