Gloves
Required when in direct contact with wet resin or liquid chemicals.
Nitrile Gloves
Required everywhere on the production floor.
Can also use an over-the-head or behind-the-neck version.
Hearing Protection
Required everywhere.
Prescription and non-prescription BOTH require full foam lining.
BE SPECIFIC (4 words)
Foam Lined Safety Glasses
Required for visitors and contractors to identify them as persons who may not be as familiar with the hazards on the production floor.
Required for shipping when loading and unloading trucks.
High Visibility Vest
Reusable - Voluntary use anywhere.
Helps to keep resin and fiberglass dust off your clothes.
Provided by Cintas
Reusable denim apron
General purpose, required at most work cells unless otherwise specified.
Material Gloves
Required during any task involving the use of a utility knife.
Can be worn as general purpose in work cells which require frequent use of utility knife.
A5 Level Cut Resistant Gloves
Required when shooting and flushing at RIM and RTM work cells.
Required when shooting and at fill location when in Overmold.
Face Shield w/ Chin Guard
Voluntary use anywhere.
Required ONLY at Con-Ed dip tank.
Not recommended to use if you are leaning over a hot tool - It will melt.
White, disposable/plastic aprons
Required everywhere on production floor.
Must meet specifications from your assigned category.
Safety Toe Shoes/Boots
Required for any job requiring the use of a palm sander.
Can be worn for general purpose.
High Visibility Anti-Vibration Gloves
Not required but recommended when handling liquid chemicals.
Splash Goggles
Not required, but available for use anywhere.
NOT considered a respirator but helps with minor particulate hazards.
Dust Mask
Voluntary use anywhere.
Not required, but highly recommended at compression presses.
Yellow Kevlar Sleeves
Recommended for use at Con-Ed dip tank.
Mostly to protect your foot ware.
Shoe/Boot Covers
Required in compression for removing parts from tool.
Required when removing 210 springs from oven.
Hot Gloves
Not required but recommended while working on compression presses.
This is to protect the forehead from being burnt.
Welding Cap/ Beanie
Recommended while running RTM tools.
Specifically, to help with the hazard created by the long U-bolts.
Bump Cap
Voluntary use anywhere.
Protects against heat and cuts while providing a "cooling" effect.
White Cut Resistant Sleeves
1883
Required when using Acetone.
Latex Gloves
Required when mixing with Norox 600 CL-2 powder and when cleaning dust collectors.
Required when mixing resins with DMA, liquid promotor.
Half Face Respirator
Required if working within 20 feet of maintenance personnel performing this task.
Also required while ice blasting.
Earmuffs (NRR 21) AND foam earplugs (33NRR)
Required at Con-Ed dip tank ONLY.
The resin will not soak through to your skin.
Yellow plastic sleeves.
You should model how this animal walks to help prevent slipping on the ice in winter.
Penguin