Safety
When should safety glasses be worn
What is, always or always on the shop floor
What is, Horseplay
A rotating part on a lathe that holds your workpiece.
What is Chuck
This type of machinist spends time reading blueprints, measuring and inspecting parts for production.
What is, inspector/Precision Inspector
In this 1996 Comedy movie Adam Sandler plays on the PGA Tour using a Hockey Stick.
What is Happy Gilmore
True or False: It is alright to wear gloves while operating machinery.
What is False!
All rings watches neck chains should be ___________ before operating machinery.
What is removed
You should never leave one of these in your chuck after tightening your workpiece on a lathe.
What is, Chuck Key/Chuck Wrench
True or False: Machinists are not a licensed trade, so there is no prior apprentice hour requirements before being qualified for work.
What is True
What was Mr. Devannys first car.
What is, 1999 Land Rover Discovery II
True or False: It is not okay for only one person to run a machine. Most machines require multiple people to operate them.
What is False!
The last shop rule 22 states: No __________unless you have teacher permission.
Cell Phones
This Part of the lathe can be used for drilling operations guided by a free moving handwheel
What is, Tailstock
These cards give fraction to decimal conversions along with drill tap sizes for machinists
What are, Starrett cards
What year was Ellis Tech Founded
What is 1916
Are jordans considered safety shoes?
What is no
This tool should never be used without a handle in shop.
What is a File
What are 3 ways to stop the lathe
what are Pull the clutch, hit the brake, Hit the Emergency Brake
Measuring tool with a Dial face that is capable of measuring inside outside and depth dimensions in thousands of an inch.
What are Dial calipers
This animal is 30 times more likely to be struck by lightning than a human.
What is a Giraffe
All long hair must be what?
Tied up or contained in a hairnet
Do not pull _________ with your hands, use a chip hook or pliers for removal.
True or False: your cutter spins on the lathe not your work piece.
What is False
True or False: Machinists do not work in customer service.
What is True
What is 19 Minutes