Propeller Theory
Propeller Designs
Forces on propellers
Propeller Controls
Propeller Maintenance
100

Pressure Down, Speed Up

What is Bernoulli's Principle?

100

Mimics operational forces during engine testing.

What is a test club?

100

Causes propeller blades to bend backwards from direction of rotation.

What is torque bending force?

100

Used to set air/fuel mixture.

What is the Condition Lever?

100

Used to measure prop angle.

What is a propeller protractor?

200

The actual distance travelled within one revolution.

What is Effective Pitch?

200

Can delaminate, causing an unusual sound when tapped on.

What is a Composite Propeller?

200

Pressure differential creating lift causes this twisting to high (coarse) pitch.

What is aerodynamic twisting force?

200

Provides the smallest blade profile during emergencies in this setting.

What is prop feathering?

200

Measurement of the magnitude of imbalance.

Inches-Per-Second (IPS)

300

Atmospheric Resistance

What is Relative Wind?

300

Mechanically controlled by the pilot.

What is a controllable pitch propeller?

300

Causes blades to bend towards airplane's direction of travel.

What is thrust bending force?

300

Propeller lever must be set at the highest rpm setting during this type of operation.

What is ground and/or beta operations.

300

Corrosion protection for a certain type of metal propeller after repair.

What is alodine or oil?

400

Doing something to cause an equal reaction.

What is Newton's Third Law?

400

Is hydraulically controlled.

What is a constant speed propeller?

400

Strength of speeder spring tends to twist the blades in this direction.

What is low (fine) pitch?

400

Causes the propeller to bend rearwards during operation.

What is prop reversing or beta operation?

400

Used in smart phones to monitor screen orientation.

What is an accelerometer?

500

Constantly adjusting due to relative wind.

What is angle of attack?

500

Blade angle can be re-pitched by bending bending and twisting.

What is an aluminum propeller?

500

This causes blades to twist into high (coarse) pitch from centrifugal force.

What are counterweights on the blade collars?

500

Used to control fluid flow in a system using multiple flow channels.

What is a pilot valve?

500

This can delaminate and cause problems with imbalance, physical damage, and icing.

Electronic Deicing System or Deicing Boot.