Line
Clearance
Clearance
The process of cleaning and clearing the work area of all previous product, documents, equipment, and materials
What is Line Clearance?
This material is not allowed in the cleanroom.
What is cardboard?
If you damage one of your gloves, you should immediately do this.
What is change your gloves and re-sanitize?
What is the operator(s) performing the step?
This identification is required to be on a bin containing product.
What is a header label?
This is the policy number for Line Clearance.
What is POL-0022?
If lip balm is to be worn in the Cleanroom, it must be this type.
What is clear lip balm?
These are two ways you can reduce contamination from cigarettes.
What is, drink a glass of water and/or wait 30 minutes to re-enter the controlled environment?
These two things are required when signing off on a process step.
What is initials and date?
This is who is responsible for maintaining Status Control during lot processing.
What is the team processing the lot?
These are 3 things you need to prepare before lot processing.
What is yourself, your work area, and your equipment?
This is the room in which materials are transferred into the Cleanroom.
What is the material pass-through (airlock)?
These are the 4 common cleaning agents we use for routine Cleanroom cleaning at Millstone.
What is Spor-Klenz, Vesphene, LPH, and 70% IPA?
This is an easy way to ensure that your documentation is legible and not easily confused with other characters.
What is the use of European characters?
This material is required to separate lots with multiple bins from another lot that is being transferred to the next process step.
What is pink plastic ribbon/wrap?
This is an acceptable way to perform etch verification of product when etching is too small.
What is utilizing a magnifying lens?
During a utility failure, this is the correct way to safeguard your materials/product.
What is place product/materials inside a covered tote or bin?
This is the way product can safely leave the controlled environment.
What is properly sealed product?
These 5 things are required when documenting a correction in your MBR.
What is: Footnote
Correction
Date
Initials
Comment
These are the 4 most common ways you can verify the status of a job.
What is: Physical location
Labeling on bin/rack
MES Oracle
MBR/DHR
This is Millstone‘s criteria for performing gross visual inspection. (3 part answer: distance, length of time, particulate size)
What is: 12-18 inches from face
5 seconds (minimum)
0.40 mm (TAPPI)
This area of Millstone is certified via this organization.
What is International Organization of Standards (ISO)?
This is the correct action to take if you have any of the following conditions: rashes, sunburn, pink eye, respiratory symptoms, etc. (CLEANROOM ONLY)
Notify your supervisor and do not go into sterile environments.
This is the procedure for documenting ”after the fact”
What is a late entry?
This is done to ensure the integrity of product.
What is safeguarding?