MEASURE
GENERAL
SAFETY
MISC.
100

HOW MANY FEET FROM THE AIRCRAFT SHOULD THE GSE PERFORM A SAFETY STOP?

15 FEET

100
WHAT MUST BE DONE PRIOR TO APPROACHING THE CARGO DOOR WITH THE BELT LOADER?

THE CARGO DOOR MUST BE FULLY OPENED

100

NAME TWO PPE THAT MUST BE WORN ON THE RAMP

EARPLUGS AND SAFETY VEST

100

This mobile motorized ramp features a rolling track to quickly move loose baggage and mail into the aircraft's lower cargo hold.

BELT LOADER

200

WHEN SHOULD THE POST ARRIVAL WALKAROUND BE COMPLETED BY A RAMP CREW?

AFTER THE BEACON LIGHT IS TURNED OFF AND AFTER THE ENGINE HAS SPOOLED DOWN

200

This 3-letter acronym refers to any object, debris, or wildlife on the tarmac that can cause catastrophic damage to aircraft engines or tires

FOD - FOREIGN OBJECT DEBRIS

200

WHAT SHOULD BE DONE IF A DRIVER IS NO LONGER SEATED IN THE DRIVER'S SEAT OF AN EQUIPMENT?

THE PARK BRAKES MUST BE SET

200

This electrical connection system must be plugged into the aircraft to power its cabin lights and instruments while the engines are shut down at the gate

GPU - GROUND POWER UNIT

300

If a marshaller holds both orange wands straight up above their head in a fixed position, they are giving this critical command to the pilot.

STOP

300

WHAT SHOULD BE DONE PRIOR TO POSITIONING THE BELT LOADER TO THE BIN?

THE HANDRAIL MUST BE LOWERED

300

WHAT SHOULD BE DONE BEFORE RAMP CREW MEMBERS ENTER OR EXIT THE AIRCRAFT BIN?

THE BELT LOADER HANDRAILS MUST BE MOVED INTO THE EXTENDED OR RAISED POSITION

300

Upon the issuance of this specific weather status code, all outdoor ramp operations must immediately cease and personnel must seek indoor shelter.

LR1 - LIGHTNING RISK WARNING

400

WHAT SHOULD RAMP PERSONNEL AVOID DOING WHILE WORKING ON THE RAMP?

STANDING OR CROSSING BETWEEN CONNECTED EQUIPMENT AND DRIVING UNDER NARROWBODY FUSELAGE AND WING

400

WHAT TWO THINGS SHOULD BE PERFORMED PRIOR TO THE AIRCRAFT ARRIVAL?

A PRE-ARRIVAL HUDDLE AND A PRE-ARRIVAL FOD WALK

400

WHEN IS IT SAFE FOR RAMP CREW MEMBERS TO APPROACH THE AIRCRAFT?

AFTER THE AIRCRAFT BEACON LIGHT IS TURNED OFF AND AFTER THE ENGINE HAS SPOOLED DOWN.

400

These specialized handheld tools are mandatory for ground crews guiding aircraft at night to ensure the flight deck can see every directive clearly.

ILLUMINATED WANDS/ NIGHT WANDS

500

This specialized ground service vehicle is used to flush and refill the aircraft’s onboard blue-water waste tanks.

LAVATORY TRUCK

500

Often called a "tug," this heavy vehicle is used to move aircraft backward away from the gate

PUSH BACK TRACTOR

500

These large, heavy rubber or wooden blocks must be placed against aircraft tires the exact moment the plane comes to a complete stop and engines cut out.

CHOCKS

500

This ground crew member walks near the outer tip of the aircraft to monitor clearance from light poles and building structures during a pushback.

WINGWALKER