IPv4
Addressing and RFC 1918
Traffic and Network Segmentation
IPv6
Dynamic Addressing
100
How many bits make up an IPv4 address?

32 bits

100

Name one of the 3 IP address ranges reserved by RFC 1918 for internal private use.

10.0.0.0/8

172.16.0.0/12

192.168.0.0/16

100

What type of transmission sends a message from one device to one specific recipient on a network?

Unicast transmission

100

How many bits make up an IPv6 address?

128 bits

100

What protocol dynamically assigns IPv4 address configurations to end devices?

Dynamic Host Configuration Protocol (DHCP)

200

What term describes the four 8-bit (1 byte) sections of an IPv4 address?

Octet

200

What service translates private IPv4 addresses to public IPv4 addresses before routing packets across the internet?

Network Address Translation (NAT)

200

What destination IP address is used when a host sends a limited broadcast packet to all devices on the local network?

255.255.255.255

200

What is the term for a 16-bit segment containing 4 hexadecimal digits in an IPv6 address?

Hextet

200

What is the exact four-step sequence of messages exchanged between a DHCP client and server?

Discover, Offer, Request, Acknowledgement

300

In the IP address 192.168.5.11 with a subnet mask of 255.255.255.0, which portion represents the host number?

The last octet, 11

300

What special IPv4 address is used by a host to direct traffic to itself to test local IP configurations?  (Hint - Loopback Address)

127.0.0.1 (or 127.0.0.0/8)

300

What networking device separates Layer 2 broadcast domains by refusing to propagate broadcast traffic by default?

Router

300

What is the most compressed format for the IPv6 address:

2001:0DB8:0000:AB00:0000:0000:0000:1234

2001:DB8:0:AB00::1234

300

What is the destination IP address used when an IPv4 host sends an initial DHCPDISCOVER message?

255.255.255.255

400

What is the network number for a /24 local area network with host IP 192.168.1.50?

192.168.1.0

400

What is one way to logically subnet/segment a network?

By location (floor 1 vs. floor 2 vs. floor 3)

By function (accounting vs. IT vs. administration)

By device type (printers vs. servers vs. hosts)

400

What is one reason a network administrator would choose to create subnets?

To improve network performance

To simplify network design

400

What is the rule that governs the double colon (::) compression technique in IPv6?

(What does the double colon replace and how many can you have in a single IPv6 address?)

The double colon can only be used once within an address to replace a contiguous string of all-zero hextets.

400

How does DHCP manage IP assignments so that addresses can be reused when devices disconnect?

Addresses are leased for a limited time and returned to the DHCP pool upon expiration or disconnection

500

Why is IPv4 addressing referred to as hierarchical addressing?

Because the address breaks into network and host portions, allowing routers to forward packets without needing to track individual host locations.

500

What legacy classful addressing block supported small networks with up to 254 host addresses using a fixed /24 prefix?

Class C

500

What IPv4 address range is reserved for multicast communication groups?

224.0.0.0 to 239.255.255.255

500

Name one of the 3 methods that allow for IPv4 and IPv6 networks to coexist during transition.

Dual-stack

Tunneling

Translation

500

What types of devices on a network are typically assigned static IP addresses rather than dynamic addresses?

Printers, web servers, and other networking infrastructure devices