(Blank)
Which file format is typically used to send 2D sketches for laser cutting?
What is DXF?
Which feature tool is commonly used to round the edges of a 3D object?
What is fillet?
In a simple two gear-system, if the input gear is turning clockwise, the output gear will turn...
What is counterclockwise?
An input gear with 12 teeth drives an idler gear with 8 teeth, which in turn drives an output gear with 48 teeth. If the input speed is 200 RPM, what is the final output speed?
What is 50 RPM?
Which drawing size is the smallest, typically used for technical drawings?
What is sheet A/drawing size A?
Which feature tool allows you to create a 3D object by connecting two different shapes with a smooth transition?
What is Loft?
If you decrease the size of the output gear in a gear system, what happens to torque?
What is a decrease?
A motor applies an input torque of 50 Nm at 600 RPM to a gear system with a gear train. The gear ratio for the total system is 5:1. Calculate the output torque.
What is 250 Nm?
What is an isometric view?
What is the purpose of the "use" tool in Onshape sketches?
What is creating reference geometry by copying parts of the sketch?
Why is stall torque dangerous for a motor if sustained too long?
What is it can cause the motor to overheat?
What is the required stroke width in Illustrator, for vector drawings with intending to laser cut?
What is .001?
Which step of the engineering design process come immediately after brainstorming ideas (Imagine Possible Solutions)?
What is selecting the best and building a prototype?
Which constraint forces two points to occupy the same position in Onshape?
What is a coincident?
In a 1:2 gear ratio, if the input speed is 80 RPM, what will be the output speed?
What is 160 RPM?
What is the purpose of the extraction fan at the laser station?
What is to remove fumes, remove smoke, and maintain visibility?
How does the EV3 Ultrasonic Sensor measure distance?
What is by timing sound waves bouncing off objects?
What is an example of additive manufacturing?
What is 3D printing?
What is 20 Nm?
Which of the following is not a safe material to laser cut?
What is PVC?