Reporting
When should you report an incident?
Immediately
Basic examples of PPE?
Hard hat, Safety Glasses, Gloves and Protective footwear.
When must a workplace exam of the plant be conducted?
Before the startup of plant equipment.
Permitted to install or repair electrical equipment?
Qualified persons.
When must a personal floatation device be worn?
An unplanned event that has the potential to, but did not result in injury, illness, or damage?
Near Miss
Reflective sticker requirement for hardhats?
6 square inches with visibility of stickers from all sides.
How should defects found during a mobile equipment pre-operational inspection be handled?
Defects must be documented and reported to a supervisor.
36-inches
When performing electrical work, who can remove locks and tags?
The person who installed them or by authorized supervisory personnel.
How to report a observed hazard?
Contact your supervisor.
When should safety glasses be worn?
At all times while outside of a controlled environment.
Who conducts inspections on fall protection prior to use?
You!
LOTOTO is achieved by placing a tag with what information?
Your Name
The Date
Reason for being locked out
What is a fire extinguishers main purpose?
To get you and others to safety.
Who do you report an incident to?
Your supervisor
Must be worn if using prescription safety glasses?
Side shields.
Do tools need inspected before use?
YES!
The last step in lock out/tag out?
Try Out
Where is hearing protection required?
In high noise areas, posted areas.
What should you do before seeking medical treatment after initially declining treatment?
Contact Dallas Satterfield and/or your supervisor
When should gloves be worn?
Must be worn as required by the task at hand.
How often are fire extinguisher inspections on equipment conducted?
Monthly
Before beginning work on equipment, each employee must ensure?
Lock Out Tag Out Try Out
The use of personal cellular and wireless communication devices shall be limited to?
Employee break rooms and personal vehicles.