Tool Pics
Open Picture #1
What is an EMAT yoke?
This task in the process that brings an ILI tool back to 80% tool status.
What is the reconditioning task?
This person is the manager of UC-SOP, and is your boss.
Who is Darrell Jackson?
EMAT is an acronymn
What is ElectroMagnetic Acoustic Transducer?
This is done when a hot battery is discovered.
What is evacuating the workspace?
Open Picture #2
What is an AFD?
Evaluate end check documents, work order and object data in order to confirm the tool/equipment is fit for purpose
What is a Final Test Technician?
A device used to measure the dimensions of an object.
What is a caliper?
This is the fastest an EMAT tool's electronics can run in a pipeline.
What is 1.5m/s?
The 2 in the code for this battery, 10CA210SD, stands for this.
Open Picture #3
What is UWD
Using pipeline information a tool config is selected, and this communicates what should be built/modified by SOP during the preparation.
What is the WO?
The ROSEN technology company
was established in this year by
Hermann Rosen, who today is
the CEO & president of the group as well as chairman of the Family Board.
What is 1981?
UCD tools have sensors are arranged in this manner.
What is Clockwise and Counter-Clockwise?
Do not work with magnets, magnetized materials or at a magnet segment, and keep a distance of (>2m) with one of these.
What is having a pacemaker?
Open Picture #4
What is a trap?
Provide required information to Project Team members, monitor and control project work and manage changes
Who is the Project Manager?
For many centuries, this metal was the favored material for water pipes, due to its malleability.
What is lead?
This has a sampling distance of 5mm at a max frequency of 300Hz
What is EMAT?
Battery packs “lose” energy without having any load connected.
What is self-discharge?
Open Picture #5
What is a U-cup?
This department becomes involved after the survey, and download of the data off the tool.
What is the Evaluation department?
A pipe bend that the bend radius is 3 times the pipe outside diameter.
What is a 3D bend?
This is set up specifically for each UCD tool after a medium measurement.
What is the Init String?
What is the Angle?
The maximum allowable weight for a person to lift before requesting a '2-man' lift.
What is 40lbs.?