This Syslog severity level provides messages only for information, while device functionality is not affected
What is Notification level?
100
This is where Cisco routers and switches send log messages for all severity levels by default.
What is console?
100
This SNMP version provides secure access to devices by authenticating and encrypting packets over the network
What is SNMPv3?
100
This improves on “original NetFlow” by adding the capability to customize the traffic analysis parameters for the specific requirements of a network administrator
What is Flexible NetFlow?
100
This syslog message type is accessible only to an administrator and only via the Cisco CLI
What is debugging?
200
This network monitoring technology provides statistics on IP packets flowing through network devices
What is NetFlow?
200
Syslog uses this protocol and this port number to send event notification messages across IP networks to event message collectors.
What are UDP and 514?
200
SNMP uses this protocol and port number retrieve and send management information
What are UDP and 162?
200
This application software provides real-time visualization and analysis of recorded and aggregated flow data
What is a NetFlow collector?
200
This SNMP version uses weak community string-based access control and supports bulk retrieval
What is SNMPv2c
300
This happens if there are no notification-types specified when using the "snmp-server enable traps" command
What is "All trap types are sent"?
300
This command displays the default logging service settings and also lists the messages in the internal buffer on a Cisco router
What is "show logging"?
300
This SNMP action allows SNMP agents to forward information directly to an NMS
What is Trap?
300
Use this command to display a summary of the NetFlow accounting statistics, which protocol uses the highest volume, and to see between which hosts this traffic flows
What is "show ip cache flow"?
300
When SNMPv1 or SNMPv2 is being used, this feature provides secure access to MIB objects
What is "community strings"?
400
These four(4) are the Syslog message destination options
What are Logging Buffer (RAM), Console Line, Terminal Line, and Syslog Server?
400
This describes the function of the logging trap command
What is "limits the syslog messages sent to the syslog server based on severity"?
400
This SNMP action change configurations on an SNMP agent
What is Set?
400
This describes NetFlow as being unidirectional
What is "For every one user connection there are two NetFlow flows, one for each direction (ingress and egress)".
400
When logging is used, this severity level indicates that a device is unusable
What is "Emergency - Level 0"?
500
This is what SNMP agents should generate to mitigate the disadvantage of SNMP polling which delays the time an event is noticed by the NMS
What are Traps?
500
This command forces each logged event to display the date and time associated with the event.
What is "service timestamps log datetime"?
500
This describes the function of SNMP community strings
What is "to authenticate access to the MIB objects, community strings are plaintext passwords used by SNMPv1 and SNMPv2c"?
500
This can be done on NetFlow if a Cisco networking device has memory constraints
What is "The size of the NetFlow cache can be pre-set so that it contains a smaller number of entries"?
500
This happens when the command "ntp server 10.1.1.1" is issued on a router
What is "synchronizes the clock of the device to the timeserver that is located at IP address 10.1.1.1"?