Random
Where on the iPad can you find Procedure that can help you with some of the jobs that exist with the work we do?
What is Engineering{IMCS/Cap D} Rules and Instructions
A roadway worker who is qualified to establish on-track safety for roadway work groups, and lone workers qualified to establish on-track safety for themselves.
Who is the RWIC?
Federal Regulations have provisions that allow an employee the right to challenge a directive which, based upon the employee's determination, would violate a railroad operating rule or special instruction?
What is a Good Faith Challenge (NORAC section B, 300 RWP)
All documents requiring a confirmation code must be?
What is: complied with before the start of duty.( RWP rule 309 section D.)
The minimum # of days of railroad service an employee must have to be assigned the duties of a watchmen?
What is 90 days (RWP rule 349 section 8)
A specific location that an affected roadway worker must occupy upon receiving a watchman’s warning of approaching movement(s)
What is the pre-determined place of safety (PPOS)
Initial job briefing must be followed by an?
What is: On-Track briefing at the worksite, which must be documented and signed. (RWP 315-3)
Which safety rules speaks on the Red Zone for Roadway Equipment is as follows: 15t in front, behind, and on the side of the standing equipment and 15ft beyond the current work area of the radial boom/arm or extendable part of the equipment,
What is Safety Rule Amendment Summary 6.15
The RWIC must ensure that all Employees in Charge (EIC) of additional work groups authorized to occupy or foul a track within the RWIC's working limits before they leave the work area must?
What is: reported clear and removed their SSD(s) if required. (RWP 318 -C-1)
Which RWP rule talks about:
Warning, Verify, Resume?
What is RWP Rule 329 section F ( Train Approach Warning)
When working limits are established on a main track, the Roadway Worker in Charge(RWIC) is responsible for the position of?
What is: All hand-operated switches (Special Instructions-133-S4)
All employees must ensure a safe workplace by complying with?
What is: all rules, instructions, and corporate polices. (RWP Principles for safe on-track operations)
A Roadway Worker other than the machine operator is prohibited from riding on any On-track roadway maintenance machine unless a ?
What is: safe and secure position( permits maintaining firm footing an a secure handhold) for each Roadway Worker on the machine is clearly identified by stenciling, marking or other written notice. ( RWP 518)
A segment of track with definite boundaries established in accordance with this manual upon which trains, engines and on-track equipment may move only as authorized by the roadway worker having control over that defined segment of track.
What are working limits?
A fixed signal governing entrance to an interlocking or controlled point
What is a home signal?
If a Watchmen cannot effectively provide Train Approach Warning for any reason, they must warn who?
Roadway Workers to clear and then immediately notify the RWIC.( RWP-329-5)