Don't cut yourself
This piece of stylish clothing is used to protect the front of your legs.
What are chainsaw chaps.
An area of protection providing safety from the danger zone.
What is the safe zone?
Two things that help hold the bar to the powerhead.
what are bar studs and bar nuts?
Doing this will get you relieved of your duties as a sawyer and possible kicked off the fire.
What is "sport falling"?
The cutting off the side branches of a felled tree.
What is the act of limbing?
When a chainsaw tries to eat your face.
What is a Kickback?
An option for all sawyers that are giving a task that they are unqualified or uncomfortable in doing.
What is respectfully declining?
The items that will help keep you safe from injury.
What is PPE?
Cutting area control and cutting material are two of the responsibilities of this person.
What is the sawyer?
To initially use the bottom tip of your bar with high RPM's and push the bar into the wood.
What is the act of boring in?
A lever that should be engaged to prevent the chain from spinning.
What is a chainbreak?
You can find the pitch, gauge and drivers on the side of this.
What is the side of the bar?
This part of the chain is used to determine the depth of cut of the cutters.
What are the rakers?
This is a good tactic for saw team line construction in light patchy fuels.
What is leap frog?
You always perform this before you do any cutting assignment.
What is a size up?
The immediate area surrounding an active sawyer.
What is the Blood Bubble
This is the proper fuel mix ratio for all Stihl products.
What is 50:1?
This keeps your chain in its correct path of travel and alignment.
What is the bar groove?
Lack of lubrication, tight and dull chain can cause this.
What is friction that can cause your bar to overheat and blue?
Colored wood and defects could be a sign of this.
What are foreign objects within the tree?
You should always wear these when sharpening a saw.
What are gloves?
Your face cuts should go this far into the tree.
What is 1/3 of the tree?
There is chipper, chisel and semi-chisel.
What are different types of saw cutters or teeth?
This is the most common face cut used in the NW soft woods.
What is the conventional cut?
You should always do this first when bucking.
What is to cut the offside?