SAFETY HISTORY
HOTWORK
CONFINED SPACES
FORK LIFT
L & H
100

belongs to the Department of Labor

What is OSHA

100

Distance from Sound damp tiles for "Hot Work"

What is 12-inches

100

Person who is assigned to ensure the safety of tank entrants by making periodic visual or audible checks when two or more persons are performing non-hazardous work in a tank or confined space.

What is a Tank Monitor

100

Point at which an object is perfectly balanced.

What is Center of Gravity

100

Shall be used to prevent operation of a crane, piece of equipment, system component, or control.

What is a Danger Tag

200

President that signed the OSHA act of 1970

What is Nixon

200

Person who has received special training by the Marine Chemist to meet the OSHA requirements for maritime Confined Space testing

What is a "Competent Person"

200

Person assigned to continuous watch duty to ensure the safety of personnel working in a confined space or group of specific tanks or confined spaces whose accesses are in close proximity, totally visible and immediately accessible from the watch position.

What is a Tank Watch

200

Point at which a forklift's rear wheels will lift off the ground if a load exceeds the capacity of the lift or extends too far out over the forks.

What is the Pivot Point

200

shall be used when troubleshooting, operationally checking or any other time when restricted or controlled operation of the crane/equipment, components, or controls is necessary.

What is a Caution Tag

300

Children as young as 12 years old were working underground in coal mines

What is 1906

300

Designated individual who has been trained to observe and respond to fire and hazards associated with Hot Work

What is a Fire Watch

300

Most hazardous Industrial gases fall into two broad categories.

What is flammable gases and asphyxiant gases

300

ODCL

What is the Operator Daily Checklist

300

Rigging "operating envelope" containing; Rigging gear & miscellaneous equipment, user of the gear or equipment, the load, rigging procedure, load's rigging path, gear or equipment's supporting structure, other personnel involved in the operation.

What is a rigging gear accident

400

Passed the nation's first safety and health legislation in 1877 guarding of belts, shafts, and gears, protection on elevators, and; adequate fire exits in factories.

What is Massachusetts

400

Person, certified by the National Fire Protection Association, who are required by law to be present and evaluate safe operating conditions for Hot Work on fuel tanks and boundaries and components adjacent to fuel tanks.

What is a Marine Chemist

400

All accesses of a Confined Space must have.

What is identical postings

400

When the three point suspension forms a triangle.

What is the "Stability Triangle"

400

Crane "operating envelop" containing; crane, operator, riggers and crane walker, lift procedure, load, rigging gear between the hook and the load, other personnel involved in the operation, and the crane's supporting structure (ground, rail, etc..)

What is a Crane Accident

500

14,000 fatalities, 2.5 million disabilities, 300,000 job related illnesses.

What is 1971

500

Welding, all types including stud shooting

What is High Energy Hot Work

500

Will be attached to the TPASS each and every time it is necessary to exit any confined space.

What is a travel key

500
Load center of gravity moves outside the stability triangle of the truck.

What is "Tip" over on that side.

500

Two riggers are considered a "team", and one rigger must be designated.

What is a Rigger-In-Charge