Safety

Fall Protection

100

What is the toprail height of a guard rail system

What is 42" +/- 3"

200

How much force does a toprail of a Guardrail system need to be able to withstand?

What is 200 lbs of Force in both the inward or downward direction

300

What does a Cable Guardrail need to have every 6 feet?

What is high visibility flagging

400

A open hole with dimensions of __________ or greater must be protected with a cover that says ________?

What is 2" and HOLE

500

What distance must Warning Lines on a roof be placed from the leading edge?

What is 6 feet for roofing work and 15 feet for non roofing work.

Electrical Hazards

100

Is it ok to use a cord with a missing ground prong?

What is NO

200

Is GFCI protection required on all temporary outlets?

What is YES

300

Temporary lighting should be installed on a ___________ circuit from other elctrical tools and equipment?

What is separate and labeled

400

Lockout/Tagout is not required when working on an energized circuit?

What is FALSE

500

Employees and equipment must maintain ____ feet clearance from all power lines.

What is 12

Scaffolding

100

Mudsills do not need to be attached to a scaffoldings base plate with nails to prevent displacement, as gravity will prevent this.

What is FALSE. Mudsills do need to be attached with Nails.

200

Crossbracing is recommended to be installed on all sections of scaffolding, but is not required.

What is FALSE. Crossbracing must be installed.

300

A yellow tag on a scaffold means that only Masons are allowed to work on the scaffold.

What is FALSE. Yellow tags mean personal fall arrest protection is required.

400

Cross Braces are a good means of climbing a scaffold

What is No. Cross Braces shall not be used as a means of access.

500

Scaffold Planks cannot extend more than _________ over the end support.

What is 12 inches

MISC

100

Extension ladders must extend _______ above the elevated work surface being accessed and the top ______

What is a minimum of 3 feet and secured

200

Fire extinguishers must be visually inspected _______ and _______ on back of tag.

What is monthly and initialed with date

300

What are 3 requirements for any liquid on the jobsite?

What is the proper container, labeled and handling of liquid 

400

Welding hoods shall be worn during all welding work, and takes the place of a hard hat.

What is FALSE. Hood shall be worn over approved Hard Hat.

500

What needs to be in the SDS binder / app on all Hy-Vee Construction jobsites

What is everything that is on your specific jobsite

Cranes

100

All crane rigging should be inspected before each use.

What is YES

200

What prevents the headache ball, load hook, or sheave from two blocking the jib end of the boom?

What is an anti-two block device

300

What minimum distance must cranes keep from overhead power lines 50Kv or less?

What is 12 feet. OSHA says 10 feet.

400

How often must Cranes be inspected?

What is Daily, Monthly and Annually.

500

What 4 items constitute a critical lift?

What are 1. 2 or more cranes, 2. Lifts made in close proximity of power lines, 3. Lifts using specialized or unique and complex rigging equipment 4. Lifts that exceed 75% of the capacity of the crane