Intro
The acronym "OSHA" stand for
What is the Occupational Safety & Health Administration?
The ____________ must pay for PPE.
What is the Employer?
The ______ _______ steps of a ladder is restricted from being utilized.
What is the Top Two?
Rescue team members are required to have training in CPR and __________
What is first aid?
The _________ is ultimately responsible for the safe condition of tools and equipment used by employees.
What is the employer?
At 40 feet the scaffold must be ____________.
What is designed?
JR Meritis located in Vancouver which was home to Washington’s oldest apple tree. How old was the tree when it died?
It died at age 194. Planted in 1826
You need to have fall protection at _________ AFF
What is 4 feet?
Who is JR Merits Safety Director
David Terry
Jr Merits address is ____________________________.
What is 505 NE 68th Drive Vancouver Washington, 98661
The OSH Act was passed into law in the year.
What is 1970?
The first method on the hierarchy of controls is ___________.
What is Elimination?
A straight ladder must extended _______ feet above the landing.
What is 3 feet?
Mushroom caps are an acceptable form of protection from rebar impalement.
True or False
False
Remember, bend the ______, not the wrist
What is Tool?
A light weight scaffold can withstand _____PSI.
What is 25?
JR Merit was the prime general contractor for this dam decommissioning project on this Dam___________ located on the White Salmon River.
Conduit Dam
___________ dust is a common threat to Bonitz installers & subcontractors
What is silica?
___________ handles payroll for JR Merit.
Who is _________?
____________ is JR Merit's phone number
360-693-7474
If there is a hazard at a workplace, but there is no specific OSHA standard covering this hazard, OSHA can still cite and fine an employer for that hazard.
What is TRUE?
____________________controls is a method of rotating employee in and out of an area the limit the exposure levels.
What is Administrative Controls?
A double ladder is required when there are ________ or more workers.
What is 25?
All confined spaces should be treated as___________
What is Hazardous?
The greatest hazards posed by hand tools result from misuse and improper __________.
What is maintenance?
Scaffold _______________ must be fully attached and may be used as a midrail.
What is cross braces?
JR Merit was founded in _____>
When is 1997?
A DOT Driver can drive/work ______ hours before requiring 8-10 hours of rest.
What is 10 hours?
The longest tenured employee at JR Merit is _____________ with ___years
Who is _______________?
____ ________ is the largest project JR Merit has ever done
What is ____________________?
Section 5a of the OSH Act of 1970 is called the ......
What is the General Duty Clause?
Fall protection must be used any time a worker is with in ______ feet from an elevated surface.
What is 6 feet?
Handrails are needed on stairwells when there are ___ or more risers.
What is 4?
Before workers enter a permit confined space, you must ensure that the hazards associated with the space have been eliminated or_________
What is controlled?
Saws, Drills and __________ are the leading causes of injury on constructions sites.
What is nail gun?
Scaffolds must have a height to base ration of
What is 4 to 1
IN the name JR Merit - "Merit" means what?
What is“merit”—the quality of being good and worthy—was something worth working for.
While working in the warehouse you should be wearing _____________, __________ and ____________ (PPE)
What is closed-toe boots, gloves & glasses?
JR Merit currently has ________ employees (rounded)
What is ____?
One of the biggest highlights has been the completion of our _________ SF (square feet) fab shop.
What is 26,000SF
The general duty clause says that employers must furnish a ________________________________________.
What is a "workplace that is free from recognized hazards that are causing or likely to cause death or serious physical harm"?
A ___________ must be in place prior to removing protection.
What is a Controlled Access Zone?
The ____________ must be opened and locked on a step ladder.
What is the metal spreader.
Methane can not exceed _____ percentage of the LEL.
What is 10 percent?
Do not carry the tool by the_______
What is cord?
_________ is the most common type of scaffold
What is frame or supported scaffold?
JR Merit Industires include Water Resources, Food and Beverage Processing, Industrial Manufacturing, High Tech Manufacturing, and ______&_________ generation.
What are Hydro & Power.
JR Merit has a current EMR of ______
What is 0.89?
If You Unbuild It, They Will Come
What is the Merit Muse.
JR Merit is signatory to_____________unions.
Who are, plumbing and pipefitter, laborer, millwright, carpenter, and sheet metal union agreements in Oregon, Washington, Idaho, Colorado, Montana, Wyoming, and Utah.