Intro
The acronym "OSHA" stand for
What is the Occupational Safety & Health Administration?
The ____________ must pay for PPE.
What is the Employer?
The ______ _______ steps of a ladder is restricted from being utilized.
What is the Top Two?
Rescue team members are required to have training in CPR and __________
What is first aid?
The _________ is ultimately responsible for the safe condition of tools and equipment used by employees.
What is the employer?
A permit is needed for air compressors that are used over _________PSI
What is 100?
At 40 feet the scaffold must be ____________.
What is designed?
Adequate ground conditions are essential for safe crane operations
True or False
What is True
Three components of forklift training are formal instruction, practical training, and __________.
What is evaluation?
When grinding a ceiling it is best practice to _____________ in order to not expose other workers to respirable silica.
What is restrict workers from the area who are not directly involved with the operations?
The OSH Act was passed into law in the year.
What is 1970?
The first method on the hierarchy of controls is ___________.
What is Elimination?
A straight ladder must extended _______ feet above the landing.
What is 3 feet?
Mushroom caps are an acceptable form of protection from rebar impalement.
True or False
False
Remember, bend the ______, not the wrist
What is Tool?
How many fire exits are required in a place of work?
What is two
A light weight scaffold can withstand _____PSI.
What is 25?
When Assembling and disassembling a crane an _____________ director must supervise the operation.
What is a A/D director?
Doctors aren't cheap, lets hear the ______ when turning a corner.
What is beep?
It is best practice to use a ________ instead of a ladder when working at height above six feet.
What is a lift?
If there is a hazard at a workplace, but there is no specific OSHA standard covering this hazard, OSHA can still cite and fine an employer for that hazard.
What is TRUE?
____________________controls is a method of rotating employee in and out of an area the limit the exposure levels.
What is Administrative Controls?
A double ladder is required when there are ________ or more workers.
What is 25?
All confined spaces should be treated as___________
What is Hazardous?
The greatest hazards posed by hand tools result from misuse and improper __________.
What is maintenance?
______________ is not allowed on any construction site and immediate dismissal from the site is required if found.
What is Smoking?
Scaffold _______________ must be fully attached and may be used as a midrail.
What is cross braces?
A Crane operator must be________ before they can operate a crane
What is certified
Information that tells you what loads your specific forklift may safely lift is located on the________
What is Capacity Plate?
Minimum required toe board height is____.
What is 3 1/2 inches?
Section 5a of the OSH Act of 1970 is called the ......
What is the General Duty Clause?
Fall protection must be used any time a worker is with in ______ feet from an elevated surface.
What is 6 feet?
Handrails are needed on stairwells when there are ___ or more risers.
What is 4?
Before workers enter a permit confined space, you must ensure that the hazards associated with the space have been eliminated or_________
What is controlled?
Saws, Drills and __________ are the leading causes of injury on constructions sites.
What is nail gun?
__________ must be obtained from the Safety Representative Prior to Operations and submitted at the when operations finish.
What is a Hot Work Permit?
Scaffolds must have a height to base ration of
What is 4 to 1
____________ must be used to guide the load.
What are taglines?
A _____is never allowed on the forklift unless specifically designed for it.
What is a passenger?
All sites must have a _____________ Plan.
What is a Site Safety Plan?
The general duty clause says that employers must furnish a ________________________________________.
What is a "workplace that is free from recognized hazards that are causing or likely to cause death or serious physical harm"?
A ___________ must be in place prior to removing protection.
What is a Controlled Access Zone?
The ____________ must be opened and locked on a step ladder.
What is the metal spreader.
Methane can not exceed _____ percentage of the LEL.
What is 10 percent?
Do not carry the tool by the_______
What is cord?
Who is responsible for ensuring employees are properly trained in FPP?
What is the employer/supervisor
_________ is the most common type of scaffold
What is frame or supported scaffold?
Crane operations must stop when wind speed reaches
What is 20 to 30 miles per hour?
When operating a forklift to load a truck backed up to a loading dock, make sure the truck is _____.
What is chocked or secured?
Safety nets must be inspected for wear, damage, and other deterioration at least once a _______.
What is week?
What is OSHA’s highest inspection priority?
What is an "imminent dangerous situation?
A body belt is a form of fall protection.
True or False
False.
A body belt is a positioning device and must be use with PFAS.
Handrails must be free of ___________.
What are puncture hazards?
Compressed gases are considered in storage when the regulator removed and ____________ are placed on.
What are caps?
The most serious hazard associated with the use of fuel-powered tools comes from_______
What is Fuel Vapor
Under the Fire Prevention Plan (FPP) portable heaters should have_________
What is tip over protection
Erector and dismantlement holds a _____ training certification.
What is a Support Scaffold?
An assist crane.
What is a Derrick?
A forklift is considered to be unattended when it is not in view of the operator or the operator is _____ or more away.
What is 25 feet?
Top rails must withstand ___ pounds of downward and outward force?
What is 200?
Osha's mission is to______
What is save lives/protect workers
Class E hardhats can resist 2,200 volts of electricity.
True or False
True
Stair pans must have ________ material before they are used to avoid tripping hazards.
What is filler?
Three elements that cause a fire are ____________.
What is heat, oxygen, and fuel?
________is the most common injury from improper tool use or fit.
What is Carpal Tunnel?
The steps to use a fire extinguisher are
What is Pull.Aim.Squeeze.Sweep?
A ____________ must be attached to the lifeline while working on a suspended scaffold.
What is a rope grab?
Cranes must stay away from power lines a certain distance.
What is 20 feet?
When traveling with a load, the load should point ___ the incline, regardless of direction of travel
What is up?
A body harness must be made from _____ fibers.
What is synthetic?
A willfull violation is cited when an employer intentionally and knowingly _____________
What is commits violation
Prior to wearing a respirator a worker must have __________.
What is a FIT test?
Staircase landings must have a __________ around the open edge.
What is a guardrail system?
___________ are the number one hazard of excavation.
What are cave-ins?
The fluid used in hydraulic power tools must be an approved ________ fluid.
What is Fire Resistant?
It is prohibited for portable space heaters to be use at construction site for human comfort.
True or False
False
A working deck on a scaffold must be fully________.
What is Planked?
All cranes and derricks must be equipped with an __________.
What is an Anemometer?
The first step to prevent powered industrial truck accidents in a facility is to establish a ____ pattern
What is traffic?
The weight hole covers should withstand must be _____ the expected weight of workers, equipment, and materials
What is twice?
What is Fall Protection
Anchor points must withstand ______ pounds?
What is 5,000?
When portable ladders are used for access to an upper landing surface, the side rails must extend _____ above the upper landing surface.
What is 3 feet?
Three roles played in a confine space operation is the _,___, and _________.
What is Attendant, Entrant, and Entry Supervisor?
Only Specifically trained employees are to use a __________ tool.
What is Powder-Actuated?
Compressed gas cages must be _____feet apart
What is 50 Feet?
Scaffolds have to be ____feet away from the power lines.
What is 10 feet?
A _______________ must monitor the crane activity at all times.
What is a Lift Director?
A forklift has the steering wheels in the _____ of the forklift so it can rotate the load into the correct position.
What is rear end?
If engineering and work practice controls do not lower employee exposure to workplace noise to acceptable levels, employees must wear appropriate _________ protection.
What is hearing?