general safety
what do you wear first when you enter the lab
safety glasses
how far does does the cover have to be from the wood depending the thickness
place pinky below
what to do to keep wood in place
clamp it down
how to line up the nail gun
hold it perfectly vertical, up and down
how to prevent fire
clean sander
what not to do in shop
horsin' around
The best time to remove scrap material from the band saw is what
when the saw stops
When operating the drill press, what should be done with long hair
Tie it back close to your head and keep your head away from moving parts
where should your hands not be
not near the gun's firing point
keep what away
fingers
yellow color coding meaning
caution
When sawing small stock, you should always use a ___________.
push stick
Which item(s) of protective equipment is/are absolutely necessary when operating the drill press?
Safety glasses
what to do after using nailgun
take off gun itself and reel back air compressor hose
Make sure you use the ______________ width of the belt.
entire
If a fellow student shows up for shop class under the influence of drugs or alcohol, what should you do to protect their safety?
Notify the instructor and Discourage them from working with the power tools and equipment
The guards on the band saw should be adjusted to be approximately what
1/8 to ΒΌ inch above the stock
Before turning on the drill press the operator should _________
tighten the drill press table locking clamp
clamp work in a vise
remove the chuck key
how to take out miss fired nail
hammer down and pliers
Keep hands and fingers at least _____________________ inches from all moving parts on any machine.
4
The Z-87.1 logo and manufacturing emblem on shop safety glasses tells the users specifically that the glasses are
rated for our shop environment (shatter resistant and impact rated)
The blade on the band saw should be installed with the teeth pointing
downward
Stock chips and curls should be removed from the drill press _________.
brush
what is connected to the nail gun
air compressor
what is used to clean the sander
abrasive cleaning stick