Cutting & Shearing; Trapping; Entanglement; Crushing; Stabbing; Impact from ejected objects describe this type of hazard.
What is machine physical hazards?
It is easiest to incorporate safety in change management process during this phase.
What is Project Conception or Design Phase?
Hazardous and Non-Hazardous are two types of this.
What is waste?
This is the second leading causes of accidental or unintended injury and death worldwide.
What is Falls?
Wrapping, straps, cords/hoses, boxes/pallets, spills are common causes of this hazard.
What are slip, trip, and fall hazards?
This person must complete required training, understand what safety practices to apply and follow all signs, work instruction, visual aids.
Who is the machine operator?
This person should be trained on all EHS change management forms and standards prior to any project kick-off.
Who is the project manager?
Chemical Waste, Biological Waste, Universal Waste, E- (Electronic) Scrap are all defined as this type of waste.
What is hazardous-waste?
Floor/walkways, ground, stairs & platforms, ladders, aerial lifts (scissor lifts, boom lifts), and roofs describe these common what?
What is walking and working surfaces?
This system must review physical condition (damage), presence of load limits, proper stacking/loading techniques.
What is the inspection system?
This safety device must be: easily reachable; installed out of the hazard zone; Not be used to shutdown equipment during standard operation; Never be obstructed by guarding, altered or covered.
What is an E-Stop?
Equipment and Process; Occupational Health and Environmental categories require this type of review prior to any change.
What is a Risk Review?
The material in the container, the hazardous characteristics, and the start date of accumulation will all be listed on this yellow sticker.
What is a hazardous waste label?
Majority of SERIOUS fall-related injuries and fatalities occur from this height.
What is 10 feet?
This item must include the total rack capacity and the maximum load of each shelf.
What is the rack label?
Fixed, Self-Adjusting, Movable/Adjustable describe this safety measure.
What is machine guarding?
Equipment, Temporary, Facility, Chemical/Material describe different types of this.
What is changes?
Oh no, there was an issue with the disposal of our universal waste, we can expect a knock on the door from this regulatory agency!
Who is the EPA (environmental protection agency)?
This effect is caused by too little friction or traction between one’s foot (footwear) and the walking/working surface, resulting in a loss of balance.
What is slips?
This edge must be painted with a safety yellow marking to provide a better view
What is the dock edge?
Continuously monitoring equipment and taking action to prevent an hazardous event describes this type of system.
What is Active Systems?
This person is responsible for completing a change notice form and the appropriate risk review tabs.
Who is the project initiator/manager?
We continuously audit this area to ensure it is covered, has secondary containment, and there is sufficient space between containers.
What is the hazardous waste storage area?
Each year, this estimated number of individuals die from falls globally.
What is 424,000?
When manually lifting an item of this weight, a risk assessment must be completed.
What is 25 lbs?