Show:
Personal Protective Equipment
Electrical Hazards and Risk Assessment
Tools and Equipment Safety
Emergency Procedures
Electrical Codes and Standards
100

What is the primary purpose of wearing insulated gloves while working with electrical systems?

  • A) To prevent burns
  • B) To protect against electric shock
  • C) To increase grip
  • D) To avoid dirt on hands
  • B) To protect against electric shock
100

Why should electricians be cautious around water?

  • A) Water can damage tools
  • B) Water reduces visibility
  • C) Water conducts electricity, increasing the risk of shock
  • D) Water can short out lights
  • A) Water conducts electricity, increasing the risk of shock
100

What should you inspect before using a power tool on-site?

  • A) The tool's warranty
  • B) The manufacturer's manual
  • C) The condition of the tool, including cords and plugs
  • D) The color of the tool
  • C) The condition of the tool, including cords and plugs
100

What is the first action to take if someone is electrocuted?

  • A) Pull them away immediately
  • B) Call for help before approaching
  • C) Perform CPR
  • D) Shut off the power source

D) Shut off the power source

100

What does the color coding of wires help identify?

  • A) The type of material used
  • B) The purpose and function of the wire
  • C) The brand of the wire
  • D) The length of the wire
  • B) The purpose and function of the wire
200

Which material should an electrician’s safety boots be made of to prevent electric shock?

  • A) Steel
  • B) Leather
  • C) Rubber
  • D) Plastic

C) Rubber 


200

What does a risk assessment primarily help electricians identify? 

  • A) Potential hazards and mitigation strategies
  • B) The quickest way to complete a job
  • C) The tools required for a task
  • D) Time estimates for a project
  • A) Potential hazards and mitigation strategies
200

Translate to Norwegian: "Extension chords"

Skjøteledninger

200

Why should you never touch someone who is in contact with a live wire?

  • A) It might scare them
  • B) You could also become electrocuted
  • C) It interrupts the current flow
  • D) It causes more damage to the wire

B) You could also become electrocuted

200

What is required to legally perform electrical work in most regions?

  • A) A permit or license
  • B) A diploma in engineering
  • C) A toolkit
  • D) A letter from an employer

A) A permit or license

300

Why is it important to wear safety goggles when working on electrical panels?

  • A) To protect against UV rays
  • B) To reduce glare
  • C) To see better in low light
  • D) To shield eyes from flying debris or sparks
  • D) To shield eyes from flying debris or sparks
300

Translate to Norwegian: "Risk assessment"

Risikovurdering

300

Which of the following tools is safest for testing live circuits?

  • A) Metal screwdriver
  • B) Voltage tester
  • C) Plastic pliers
  • D) Multimeter
  • B) Voltage tester
300

When is it safe to approach an accident involving live electricity?

  • A) Once the circuit breaker is turned off
  • B) After wearing insulated gloves
  • C) When someone else is helping
  • D) Only after medical help arrives

A) Once the circuit breaker is turned off

300

Why is it important to follow grounding procedures during installation?

  • A) To prevent short circuits
  • B) To protect people from electric shock
  • C) To save time
  • D) To improve conductivity

B) To protect people from electric shock

400

What feature should a hard hat have to be suitable for electrical work?

  • A) Ventilation holes
  • B) Non-conductive properties
  • C) Lightweight design
  • D) Adjustable straps

B) Non-conductive properties

400

What is the first step in assessing an electrical hazard?

  • A) Start working to identify the problem
  • B) Shut down the power source
  • C) Determine the type of equipment involved
  • D) Check for the right tools
  • B) Shut down the power source
400

Why should extension cords not be used for permanent installations?

  • A) They are prone to overheating and damage over time
  • B) They are too expensive
  • C) They cannot handle high voltage
  • D) They are difficult to organize
  • A) They are prone to overheating and damage over time
400

Translate to Norwegian: "Circuit Breaker"

Automatsikring

400

Translate to Norwegian: "short circuits"

kortslutninger

500

What PPE is essential when working with arc flash hazards?

  • A) Flame-resistant clothing
  • B) Regular cotton overalls
  • C) Insulated leather gloves
  • D) Chemical-resistant apron
  • A) Flame-resistant clothing
500

Translate to Norwegian: "Hazard"

Fare

500

Translate to English: "isolert"

Insulated

500

What is the purpose of an emergency shutoff switch?

  • A) To reset the system
  • B) To immediately disconnect power during an emergency
  • C) To slow down the current flow
  • D) To monitor the voltage levels
  • A) To reset the system
500

Translate to English: "Helse, Miljø og Sikkerhet"

Health, Safety and Environment.