Falls/Excavations
Fall arrest equipment is used to prevent a worker from falling. True or False?
What is False?
When properly positioned for use, an extension ladder should be angled at a ___ to ___ ratio ( vertical to horizontal).
What is a 4 to 1 ratio.
What is the most extreme level of heat illness?
The Latin Term Quid Pro Quo is defined as?
What is " This for That"
OSHA was created in what year?
What was 1970?
If water is present in the trench, the soil type is automatically Type ___ soil.
What is Type C soil?
What is the federal OSHA trigger height for mandatory scaffold fall protection?
What is 10 feet
According to the hierarchy of controls, what is the most effective and desired hazard control method?
What is Elimination
The regulations require at a minimum, which type of fire extinguisher?
What is 2A
Define SDS:
What is a Safety Data Sheet.
When used as fall prevention, guard rails must include a top rail which is between ____ inches above the working level.
What is 42 plus or minus 3.
39"-45"
What is the name of the piece of wood placed under the scaffold on unstable surfaces?
What is a Mud sill
When working over or near water, the employer must provide?
OSHA enforces ergonomics under what regulation?
What is the General Duty Clause
What is the standard procedure used to safely de-energize equipment on circuits before any work is conducted upon them?
What is Lock Out/ Tag Out- LOTO
Ladders for entry and egress must be placed such that no worker is more than ___ feet from any ladder.
What is 25 feet.
There must be a ladder or stairway at points of access where there is a break in elevation of ___ inches or more?
What is 19 inches
Eyewear must meet what requirements?
What is ANSI Z87
What is another name for procurement?
What is purchasing?
What is 2 feet
These 2 methods are acceptable methods of protecting workers in an excavation.
Must get both answers correct
What is Sloping and Benching.
When used to gain access to a higher elevation, extension ladders must extend a minimum of ___ inches beyond the level being accessed.
What is 36 inches
DAILY DOUBLE!!!!
What is the PEL for silica?
What is 50 ug/m3
OSHA considers oxygen levels below this percentage to be oxygen-deficient.
What is 19.5 %?
" AGC " stands for?
Associated General Contractors