General
You should ask this person before touching ANY makex tools
What is a Mega Based Counselor? (OHN YEA)
You should always assume the soldering iron is this
What is hot? (YEOWCH)
How should you place the hot glue guns when they aren't in use
What is facing down with the stand?
You should always assume that these two components of a 3d printer are hot
What are the build plate and the nozzle? (No touchy)
Never operate woodshop tools without these:
What are personal protection equipment and a absolutely swag counselor? (See awesome shirts for reference)
The xacto knife blade should be pointed _____(where?) when putting it away
what is up?
Where should you hold the soldering iron from
What is the plastic shaft?
You should watch out for this hot machine when entering and exiting main
What is the heat press?
This is the dangerous part of the Vinyl cutter
What is the blade?
This is how far you should keep your hands away from any blade
What is 5 inches? (Please don't cut off your fingers)
This is the only time it is okay for a camper to enter the loft
When is never, absolutely not, unacceptable, never in your life ?
Where should you put the soldering iron when it is not in use
What is the soldering iron holder?
The lid should always be closed before operating this machine
What is the laser cutter? (VERY IMPORTANT! REMEMBER THIS ONE! #NOCANCER)
This is what you should do before removing the microSD card on the Bambu printers
What is ejecting the microSD card?
These are all of the PPE and clothing conditions needed to enter woodshop
What are safety glasses, hair ties, closed toed shoes, headphones, sleeves rolled up, and hoodie strings tucked in? (COMMON SENSE)
The angle at which you should keep an xacto blade while using it
What is 45 degrees?
This is something you should never do with a battery
What is connecting both ends with a single wire?(ZzZap)
This is the name of the big gray fan that removes toxic smells from the laser cutter
What is the fume extractor? (Extracts the stink as well)
These are the cleanup steps you must take before leaving printers
What are checking for filament/vinyl scraps, vacuum, put away vinyl? (Clean up spills, yes... this has happened)
This is the maximum amount of people allowed in woodshop at a time
What is 3 (2 campers + a counselor who is totally awesome, cool, and dripped #infiniteAURA)
These are the things you should do before leaving camp for the day
What is talking to a counselor, cleaning up and signing out? (Also say goodbye)
These are some examples of conductors and insulators
Conductor: What is copper?
Insulator: What is plastic/rubber?
These are all the parts of the heat press that get hot
What are both plates?
This is the type of plastic that should be used for 3d printing
What is PLA? (its nontoxic) (P.S. ALL of the other plastics are REALLY TOXIC)
This is how you can reduce sawdust mess in woodshop:
What is inserting the vacuum hose into its slot on each tool? (Clean up after yourself always, the counselors are always watching...)