_______ and ________ controls should be instituted to reduce employee exposures wherever possible.
What are engineering and administrative. G1.12
100
_________, _______, and __________ work on electrical circuits or apparatus shall not be done until proper authorization has been obtained for performing work.
What is maintenance, repair,and construction work. E1.01
100
Some of these if not properly tied and tightened, before load tension is applied may slip.
What are KNOTS. D3.02
100
Who shall notify each crew logged on a circuit, circuit portion, or equipment prior to it being energized.
What is Dispatching Authority. Site1.D.3
100
Before starting the engine of a tractor, bulldozer, etc., the employee shall complete a _______ _______ inspection and put all controls in neutral or park.
What is walk-around? G4.27
200
These shall be worn in all production, construction, and maintenance areas, or when ther is exposure to flying fragments, objects, large chips and particles.
What is safety glasses with side shields or goggles. G1.13
200
Employees shall not open these under load conditions unless the device used is designed to interrupt the current involved.
What is circuits. E1.05
200
Alloy steel chain slings with cracked or deformed master links, coupling links, other components, or missing ID tag shall be _______ _____ _______.
What is removed from service. D3.25
200
This number of HOLD tags are required when multiple individuals are issued OPERATING ORDERS concurrently.
What is only one. Site2.B.4
200
Before connecting or reconnecting service conductors, a test shall be made to determine which wire is _______.
What is Grounded? E1.21
300
All employees shall wear these in designated areas or whenever they may be exposed to electrical or impact hazards, or other hazards that may cause head injury.
What is approved protective headgear. G1.18
300
Anytime equipment( crane, derrick,etc) is being used by a qualified electrical worker near energized lines and the minimum approached cannot be maintained, the mobile equipment shall be ________ and considered _________.
What is barricaded and considered energized. E1.12
300
This is the hand signal for lower the load.
What is spinning your finger pointing down.D4.01
300
No device whether on a line or in a station will be operated without permission from the proper Dispatching Authority except in an __________.
What is an emergency? Site5.A1
300
Employees shall not attach or remove ______ or ________ from a pole or structure until they are sure the pole or structure will withstand the altered stress.
What is guy wires or conductors? E2.27
400
No employee shall enter this while the customer holds an animal.
What is customer's yard. G1.28
400
When working the bare hand method, the ______ _______ feature of the circuit-interrupting device shall be made inoperative before working on any energized line or equipment.
What is automatic reclosing. E2.46
400
Spell H-E-A-L-T-H using the phoetic alphabet.
What is hotel-echo-alpha-lima-tango-hotel.
400
Switching Instuctions for Operating orders will not include the opening and tagging of ________ _______.
What is alarm switches?
400
Employees shall take steps to protect against dangerous _______ or other recognized hazards within both confined or enclosed spaces.
What is atmospheres? G1.29
500
Portable metal ladders or ladders with metal side rails shall not be used near this.
What is electrical equipment. G4.35
500
Workers shall not ______- ______ secondary circuits of potential transformers when the potential transformer is connected to the energized primary.
What is short- circuited. E3.09
500
The types of ropes referred to in the data section are ______ or ________ ropes of the conventional three strand construction.
What is natural and synthetic. D3.01
500
Motor operated switches that are opened as an isolation point shall have the motor operator rendered inoperable by disengaging the ______ ______ from the motor mechanism.
What is operating rod? Site5.E.5
500
All ______ _______ shall be notified when an operating order is to be released and shall be in the clear.