What are the four necessary requirements that must be present for fire to exist?
heat, oxygen, fuel and a chemical reaction between the three.
100
What is heat stress.
When the body is unable to cool itself by sweating, several heat-induced illnesses such as heat cramps, heat exhaustion and the more severe heat stroke.
100
What is the time frequency hard hat suspension and hard hats need to be replaced?
suspension - 12 months
hard hat - 5 years
100
What is the three characteristics that defines a confined space
1. Large enough and so configured that an employee can bodily enter and perform work
2. Limited or restricted means of entry or exit,
3. Not designed for continuous human occupancy.
100
What is the information required to be on your personal lock?
Name, Company, contact information
200
How often should an extinguisher receive a visual inspection.
once a month
200
The consumption of what two drinks can increase the risk of dehydration and other heat-related illnesses.
alcohol and soda
200
Name 7 items of PPE we commonly wear
Hard hats, FR clothing, High Viz vest, gloves, eye protection, safety harness, safety footwear, ear protection
200
Name three hazards that may be encountered in a confined space:
Materials that can engulf an entrant, Moving machinery, Oxygen deficiency, darkness
200
Before changing a hot compressor valve, how many locks are needed to lock a unit out at the Auburn Compression Station?
11 + your personal lock = 12
300
A fire involving flammable liquids is classified is which type of fire?
Class B fire
300
What is the process in which your body loses more fluids than it takes in?
Dehydration
300
What is the unit of measure that is used to rate FR clothing
Calories per Centimeter squared (Cal/cm2 )
300
how long are confined space entry permit to be kept on file
At least one year.
300
What are the inscriptions on a typical compressor lockout lock?
Company logo, Station Designation, Unit Designation, Associated Key Code, Lock Placement
400
Yellow fire extinguisher and metals such as titanium
What is the color of a Class D fire extinguisher and what does it put out?
What is the acceptable range of oxygen levels for confined space entry?
19.5% and 23.5%
400
An operator needs to change a leaky suction scrubber dump valve, what steps would the operator follow?
1. JHA
2. call gas control
3. Isolate Compressor Package using all available unit locks and perform de-energize checks
4. Isolate and lock out all valves downstream of scrubber dump valve including outside dump valves
500
What is the class of fire involving energized electrical equipment such as motors, transformers, and appliances?
Class C
500
What is the largest component of the human body and what % does it make up of it?
water, making up about 60 percent of your body weight.
500
What amount of weight and from what height can your steel toe boots protect you?
It has been proven that steel toe boots can protect your feet from a 300 pound weight being dropped from 3 feet.
500
When does a person actually “enter” a confined space?
A worker is considered entering a confined space when the breathing zone of the worker breaks the plane of the opening to the confined space. Breathing zone is defined as the area within a 10 inch radius of the worker’s nose and mouth.
500
If personnel are to work on the Aux. Coolant System of the engine, what are the proper locks that should be administered to isolate the energy sources that would directly affect the work area?
-Engine Fuel Gas Supply - Closed
-Engine Fuel Gas Scrubber Drain – Open to Vent first then Closed
-Starter Air Supply Valve - Closed
-Panel Power – Positioned to OFF
-Battery Power (Auburn Comp. Station ONLY) – Positioned to OFF