Fall Protection
The three pieces of equipment in a fall arrest system
What is Anchor, Lanyard/SRL (Connector), and Harness (Body Holding Device)
Hearing protection is required above _______ decibels
What is 85 dB
The colour of personal locks
What is red?
WHMIS
What is Workplace Hazardous Material Information System
What is 20-20-20
Every 20 minutes, take 20 seconds to look 20 m around you
The height that a fall protection or fall arrest system is required at Brucejack
What is 2.5 m or 8 ft
This class of fire extinguisher is suited for combustible metals
What is class D
De-energizing at this voltage and above is to be done by an electrician
What is 600 V
CMT
What is Construction Management Team
What does SOP stand for
Safe operating procedure
The only type of harness allowed at Brucejack for fall arrest
What is full body harness
The probe, shovel, and _______ are part of an avalanche PPE kit
What is transceiver
A type of electrical explosion or discharge that results from a low-impedance connection through air to ground or another voltage phase in an electrical system.
What is Arc Flash
MERP
What is Mine Emergency Response Plan
Call supervisor immediately
What you do if you have an incident
At this height and above a specific fall protection plan is required
What is 25 ft
Workplace and _________ are the only two types of WHMIS labels.
The type of state a system must be in before conducting work
What is zero energy state
JOHSC
What is Joint Occupational Health and Safety Committee
What is situational awareness
Required awareness to move about
The minimum strength requirement for a temporary travel restraint anchor point
What is 800lbs
The most effective method of hazard control according to Worksafe BC
What is qualified worker
TLV-TWA
What is Threshold Limit Value
What is Hazard identification
Evaluation to identify something that may potentially cause harm