General Safety (OSHA)
What does OSHA stand for?
Occupational Safety and Health Administration
This button stops a ride immediately.
Emergency Stop or E Stop
How many points of contact must you have on a ladder at all times?
3 points of contact
What is the extension and Ch.# to reach LEGOBASE in the case of an fire.
x888 or Ch.1
Boxes have been delivered right in front of an exit door. What is the wrong?
Blocked exit / egress obstruction
This document provides detailed information about a chemical’s hazards and safe handling.
SDS (Safety Data Sheets)
This is the name for the process of boarding a ride vehicle.
Loading
This type of maintenance happens routinely to prevent breakdowns and wear and tear.
Preventative Maintenance
What does P.A.S.S. stand for?
Pull, aim, squeeze, sweep
A power strip is plugged into another power strip under a desk. What is wrong?
Daisy chaining / improper cord use / electrical hazard
What does the IIPP stand for.
Injury Illness Prevention Plan
This is the general name for all types of securing devices that can be used on a ride, such as lap bars and seat belts.
Restraints
Physical barriers designed to protect workers from mechanical hazards such as rotating parts, flying debris, and crushing motions
Machine guards
This type of door must automatically close to prevent fire, smoke spreading, and can withstand a fire for a designated amount of hours.
A fire-rated door.
A worker pours a chemical from a larger container into a new spray bottle and writes "cleaner" on it. What is wrong?
Incorrect labelling / HazCom violation
What is the temperature that triggers the Heat Illlness Prevention Plan outdoors in California?
80 degrees
These walkways along a track allow technicians to access stopping points and work on track parts.
Catwalks
This device protects against electrical shock by shutting power off quickly in wet and outdoor environments.
GFCI or Ground Fault Circuit Interrupter
The minimum vertical clearance below fire sprinkler deflectors is how many inches.
18 inches
A worker comes across a broken tool and puts it on top of the cabinet to isolate it away from the others that are still safe to use.
The worker forgot to tag it as defective or put it in a clearly marked area that designates it as broken equipment and not to be used.
Fall protection/mitigation is required at what height in California?
30 inches
This envelope is the area determined by how far a rider can stretch out and potentially touch.
Reach Envelope
How many feet of clearance are required in front of an electrical panel?
3 feet
75 feet
A contractor is welding out in the open in a parkling lot. His spotter leaves to go to the bathroom for a few minutes. The contractor continues working since his spotter will be gone for less than 5 minutes.
When welding, you always need a spotter present at all times or a physical barrier.