Lock Out Tag Out
What does LTCT stand for?
What is lock,tag, clear, try
Locking out a main electrical breaker eliminates all hazardous energy within the machine
What is false (Stored energy, like capacitors or hydraulics, may still exist and needs to be released or restrained)
A tagout device provides a visual __________ that the equipment should not be operated.
What is warning
When is it acceptable to remove a lockout or tag from a machine?
a) When the affected employee removes their personal device.
b) When the supervisor gives permission.
c) When the machine appears to be safe.
d) Only by authorized personnel after maintenance is complete.
What is answer d) Only by authorized personnel after maintenance is complete
What is the Hand Safety/ PPE teams motto?
What is do not put your hands anywhere you wouldn't put your head!
What is the purpose of Lock Out Tag out?
Tags provide the same level of protection as locks in a LOTO procedure
What is false (Tags are warning devices, while locks physically prevent activation)
After isolating the energy source, the next step is to perform a ______ to ensure the equipment is de-energized.
What is stored energy check
What type of employee is responsible for performing maintenance or servicing of equipment under LOTO procedures?
a) Affected employee
b) Other employee
c) Authorized employee.
d) General employee
What is c) authorized employee
What is the OSHA lifting rate for a woman?
What is
What is the first step of a Lock out procedure?
what is notifying affected personnel, identifying energy sources
LOTO procedures require that all energy sources are properly isolated to ensure safety
Authorized employees are those who lock or tag machines or equipment during ______ or ______
What is servicing, maintenance
What is the main purpose of a "try-out" verification in LOTO procedures?
a) To test the effectiveness of the lockout device.
b) To ensure all personnel are clear of the equipment.
c) To verify that all tools are removed from the area.
d) To confirm the equipment is properly cleaned.
What is a)To test the effectiveness of the lockout device.
What is the first thing you MUST do before driving any mobile equipment?
What is fill out the daily red card audit
When should lockout/tagout procedures be performed?
What is before servicing or maintenance of equipment where unexpected energization or start-up could cause injury.
During a group lockout, only the person in charge of the procedure will place their lock and tag onto the energy isolating device
What is false
Before removing lockout/tagout devices and re-energizing equipment, it is crucial to verify that all tools and materials have been ______ from the machine and that all personnel are ______.
What is removed, clear
When can a tagout device be removed by an affected employee?
a) When the employee needs to perform maintenance on the equipment.
b) When the authorized employee who applied the tag is not available.
c) When the authorized employee who applied the tag is present and authorizes the removal.
d) Never.
What is c) When the authorized employee who applied the tag is present and authorizes the removal.
Where SDS sheets located?
What is on all desk tops
When is it ok to tamper with or remove a lock from a piece of equipment if you are not the authorized associate identified on the lock?
What is NEVER!
LOTO devices must be labeled to identify the specific employees authorized to apply & remove them.
What is true
When multiple employees are working on the same equipment, each employee must apply their own ______ and ______ .
What is lock, tag
What is the primary responsibility of the authorized employee in a LOTO procedure?
a) To ensure all affected employees understand the procedure.
b) To ensure the energy source is properly isolated and de-energized.
c) To operate the equipment after the lockout is complete.
d) To train other employees on LOTO procedures.
What is b) To ensure the energy source is properly isolated and de-energized.
It is ok to prop plant doors open and let associated in without scanning their badge?
What is FALSE!