Electrical
Hydraulic
Communication
Scissor Stack
Wild Card
100

This scientific law explains the relationship between Electromotive Force, Intensity and Resistance.

What is Ohm's Law?

100

This scientific law explains the relationship between Pressure, Force and Area in a hydraulic system.

What is Pascal's Law?

100

This 4-pin service tool is required in order interface with the machine control module and read configuration information.

What is the JLG Analyzer?

100

When servicing the components in-between the scissor arms, this safety device must be engaged.

What is the Safety Prop?

100

This inspection type must be conducted within every 13 months.

What is an annual inspection?

200

The Line contactor is located here on ESXXXX series scissor machines.

Where is "inside the compartment door"?

200

This type of hydraulic pump is mounted to the pump motor and located inside the manifold, and can only be seen when the motor is removed.

What is a gear-style Pump?

200

This menu allows you to view and change the model market.

What is the Machine Set-up Menu?

200

In a 1932R scissor lift, these two numbers indicate the width of the machine

What is 32?

200

This planet, our rocky neighbor, is the hottest in the solar system, boasting an average temperature of around 864 degrees Fahrenheit.

What is Venus?

300

The ESXXXX scissor brakes require this electrical input in order to release.

What is 24 Volts?

300

This hydraulic valve is located on the lift cylinder.

What is the lift-down valve?

300

This circuit allows the platform module to communicate with the system module.

What is the CANbus circuit?

300

This safety feature is deployed when the platform is in the raised position.

What are the Pot-Hole Protection bars?

300

This clarinet-playing cephalopod lives in an Easter-Island head.

Who is Squidward Tentacles?

400

This feature disables the operation of the scissor lift whilst being charged.

What is the Battery Charger Interlock?

400

This hydraulic circuit operates the steering priority valve.

What is Hydraulic Pilot Pressure?

400

A reading of 60 ohms on the Control Area Network Backbone.

What is a good CANbus Resistance reading?

400

This system is designed to measure the load in the platform.

What is the platform Load Sensing System?

400

This legally-bonded type of Whiskey must be distilled from at least 51% corn and aged only in charred new oak barrels.

What is Bourbon?

500

This dual-channel sensor is designed to read the platform height.

What is the Rotary Angle Sensor?

500

2538 psi (175 Bar)

What is the relief pressure for all ES scissor lifts?

500

The absence of one of these on a CAN bus circuit will result in a resistance reading of 120 Ohms.

What is a terminating resistor?

500

On CE and Chinese market machines, this safety system is designed to reduce the potential for trapping and shearing associated with the machine's arm stack.

What are electronic armguards?

500

This geometric steering principle is designed to minimize tire scrub at zero-turn radius.

What is the Ackerman Principle?