Water Service
The maximum PSI you should have in the home is ____?
80 PSI
Isolation valves should be of ____ _____ design
and tested annually
Full Port
This type of fitting as one end that can receive pipe, while the other end can be inserted into another fitting.
What is a Street Fitting
_____ is known as the universal solvent
What is water
The Minimum size water line used for a water size is ____?
What is 3/4"
This type of valve can be used to isolate and winterize a section of piping.
What is a stop and waste valve
This term is designated to describe the result of flow calculation from a fixture.
What is WSFU (Water Supply Fixture Unit)
A buildup of hardwater can cause these issues with your faucets.
What is low flow and Sporadic Spray
Dissimilar Pipes should be joint using this type of fitting
What is an NPT Mechanical fitting
To Prevent the possibility of contamination this device is installed on most outside faucets.
What is a Vacuum breaker
The three factors used to size a water distribution system properly are _____ _______ and _______
What are Pressure Volume and Distance
This element used to disinfect water is poisonous gas that is highly irritating to the respiratory organs.
What is Chlorine
The Classes of Pipe type used in plumbing are ____ and ____
What are IPS and CTS
This type of device is used to regulate the pressure of water coming into a home
What is a PRV
A Supply line on a fixture can be a maximum length of ____?
What is 30"
This type of water treatment system is used to remove the salinity of water in offshore boats and homes.
What is an R/O (Reverse Osmosis System)
Pipes used in water service must be able to handle
160PSI @ 73 Degrees
While the Air Gap is the best method to prevent backflow, a _____ is the best device to protect against it as well.
What is the RPZ
Pipes used in distribution should have a rating of at least this temperature and pressure ratings.
100 psi at 180 Degrees
This material is effective at removing deleterious chemicals from the water
What is Carbon