Show:
Machine parts
Speeds & Feeds
Tooling
Workholding
Operations
100

allows machine to turn 360 degrees

Turret

100

what does FPT stand for

Feed per tooth

100

What is the most common two types of material of milling cutters.

HSS and Carbide

100

what are the two types of jaws on a vise called

 solid and moveable

100

process of adjusting the head of the spindle perpendicular to the table

tramming

200

allows the head to move back and forth

Ram
200

What is the formula for IPM

IPM= FPT x N x RPM

200

What decides the shape of the chip on a carbide insert

chipformer

200

a device that holds parts so they can be held vertically or horizontally in a vise

collect block

200

used to accurately establish a reference edge

edge finder

300

passes through the spindle and provides a means for securing tools in the spindle

drawbar

300
  • Calculate spindle speed and feed for HSS 1/2"-diameter three-flute endmill to mill with 350 SFPM using a 0.0015" chip load.

12.033

300

how is a slitting saw held in a milling machine spindle

stub arbor

300

workholding device that uses air suction to hold parts in place

vacuum plates

300

used to hold a boring bar

boring head

400

set to limit quill travel

micrometer adjusting nut

400
  • Calculate spindle speed and feed for HSS 5/8"-diameter 2-flute endmill to mill with 475 SFPM using a 0.008" chip load.

46.448

400

what is the flat part on the shank of an endmill called

weldon flat

400

highly secure fastening system for unique shaped parts

fixture

400

for proper chip breaking, the depth of cut should be 2/3 of the ___________

tool nose radius

500

used when an emergency requires the spindle to be stopped immediately

spindle brake

500
  • Calculate spindle speed and feed for HSS 9/16"-diameter 4-flute endmill to mill with 550 SFPM using a 0.007" chip load.

104.58

500
what type of tool would be used to cut a woodruff keyseat

woodruff keyseat cutter

500

glue-base that cures when exposed to ultraviolet light

adhesive-based workholding

500

two types of peripheral milling

conventional and climb milling