Basic Shop Safety
These should be worn in the shop at all times
What are safety glasses
Why should you not sand small work pieces on the belt sander?
they can turn and twist and pull your hand in
Always use the right _____ and _____ of tool
What are type and size
Make sure the blade is tensioned properly and the teeth are pointed _____
Never hang these or stack these near the edge of a work bench
what are tools
You should get this persons instructions before you use any tool in the shop
what is the instructor
You should always switch on the sander and make sure it is ______ ________
Tracking properly
Where should you never aim a cutting tool?
Towards your hands, arms, or body
Do not try and cut this material on the band saw
What is cylindrical stock
These should be closed and locked before the bandsaw is turned on
what are wheel locks?
These should be kept closed when not in use
What is a vise
Can freshly sanded things be hot enough to burn you?
yes
Be sure this is fitted securely before use
what is the handle
If you hear the blade clicking, what should you do?
Turn off the saw immediately
When you are finished with a tool you should
Return it to the assigned storage area
Make sure you get someone to ______ _____ a long piece of lumber
What is tail off
The belt will ____ if tension is too tight and it will ____ if tension is too loose
break, slip
You should plan your work so you can keep your____
Balance
The height the upper blade guide should be adjusted to over what you are about to cut
What is 1/4 inch
You should use this when you sand thin material
a push block
These can spontaneously combust
What are oily rags
what cannot be on the wood before you sand
gummy resin, paint, finish, or hardware
You should do this instead of trying to hold your workpiece
secure or clamp it down
You should never stand on this side of the saw
What is the right side
What is the electrical taped ball I throw at people called?
stressy