PPE
Fire Safety
Shop Tools
Vehicle Safety
General Safety
100

These are used to protect your eyes in the shop.

Safety glasses or goggles

100

The three things needed for a fire to take place.

Oxygen, fuel, and heat.

100

A thick walled socket used with an impact wrench. 

Impact socket.

100

This should be disconnected before working on the vehicle electrical system.  

Negative or ground battery cable

100

This is where you find information on hazardous materials in the shop. 

SDS 

200

The level at which hearing protection must be worn.

AKA The OSHA Action Level

80 dB

200

Temperature which vapors ignite when exposed to open flame or heat source.    

Flash point

200

This should be stood on end when not in use to prevent an unsafe condition.

Floor Creeper

200

You should squeeze the upper radiator hose to test for pressure before opening this.

Radiator cap

200

Fire extinguishers and eye wash stations are two of these in the shop.

Safety controls.

300

The type of PPE that prevents chemicals from getting to your skin and causing harm.

Impervious 

300

This type of fire extinguisher is in the shop.

ABC

300

This is what should be done to mushroomed punches and chisels before use.

Ground smooth

300

This should be done before disconnecting the leads on a battery that is being charged to prevent explosion.

Turn the charger off.

300

An altered safety guard on a bench grinder is an example of this.

Unsafe condition

400

This type of footwear should be used if the work environment is wet or damp

Leather work boots

400

This cannot be used to extinguish an oil fire

Water or Class A extinguisher

400

This shop tool can produce up to 50 tons of force. 

Hydraulic press.

400

This is where you can find the proper lift points on a vehicle.

 lift manual or owners manual.

400

Play fighting with a classmate in the shop is an example of this.

Unsafe Act

500

This type of glove is used when working with electricity. 

Insulated gloves

500

This can only be extinguished with a class D extinguisher.

Flammable Metals such as Magnesium or potassium 

500

This tool must be used with the proper speed rated attachments because of the high RPM's it will spin.

Die Grinder

500

These are high voltage systems in a vehicle.


Hybrid/EV battery and HID headlights

500

Everyone is responsible for this in the shop.

Safety