You need these on when you enter shop doors.
Safety glasses
The size of the bubble around people when using the bandsaw.
3 feet
Check/adjust table _____.
Height
The measurement of the blade height.
1/4 inch above material
The angle of cut should be set at _____ and double check the angle the blade is cutting at.
Keep the work area ______.
Clean
Check/adjust blade guard (_________________).
One finger above the mat.
Place piece of ____ ______ underneath.
Scrap, material
The blade guard should be ______.
Down
Make sure your hands are ____ away from the blade and keep the material ______ to fence and table.
3 inches, flush
Loose clothing, hoodie strings, and open-toed shoes are not these.
Proper clothing
Keep your hands ______ away from the blade at all times.
3 inches
Make the drill bit is ____ and the ____ ___.
Straight, right, size
Make sure that a ________ is in reach.
Push stick
Squeeze _____ and pull blade down at a _____, steady pace.
Trigger, smooth.
Think before you ____ the _____.
Flip, switch
If you are cutting sharp cuts use this.
A relief cut
Distance your hands should be away from the drill press at all times.
2 inches
Keep body on the _____ side in case of kick backs.
Left
Bring the _____ up and release the ___/___ switch.
Blade, on/off
No ______ in the shop.
Horseplay
Don't walk away until the blade is _________.
Completly stopped
Never _____________ while using drill press and keep a __________ of material.
Cross your hands, firm grip
Keep your hands this far away from the blade at all times.
3 inches
BLADE: Cut the material with this side of the blade.
Check to see if the blade is ____ before using.
Sharp side
Sharp