Show:
P.P.E.
Shop Etiquette
Tool Safety
Fire Safety
Safety Color Code
100
These must be on at all times while in the shop.
What is safety glasses.
100

These actions are not acceptable or allowed in the shop.

What is carelessness or horseplay

100
When tools or equipment become defective or quit working students should do this.
What is report them to the instructor.
100
This class of fire is the most common type is comprised of Ordinary combustibles such as wood, paper, cloth etc.
What is Class A
100
This color indicates first aide or other safety equipment not used in the prevention or extinguishing of fires.
What is Green
200

These must be on at all times while in the shop to prevent burns, scrapes, severed toes, or any foot injury.

What is closed toed shoes/boots.

200
A student is only permitted to leave the shop when they have this.
What is the instructors permission.
200

Before using the drum sander all students should take this action to ensure their safety.

What is make sure all guards are in place/ wearing the proper P.P.E to run the machine/ check sand paper for damage.

200
You should never use water to put out this Class of fire because it will cause the fuel to scatter spreading the flames.
What is Class B
200
This is the most widely recognized color for indicating hazards.
What is Red
300

Shop clothing is unsafe if it is

What is loose and baggy.

300
At the end of each class period the shop will be this.
What is cleaned and all tools returned to their proper place.
300

When using the miter saw, this needs to be done with each piece of wood prior to the machine being turned on to make the cut.

What is clamping, securing wood to the fence of the saw table.

300

Class D Fires should be put out using this method because other methods have proved ineffective on extinguishing these high heat fires.

What is dry chemical extinguishing agents.

300
Yellow warns workers to do this.
What is proceed with caution
400

This must be done with long hair before operating any equipment in the shop

What is tied back or under a hat

400
When someone is working/welding in the shop it is unacceptable to do this.
What is disturb/surprise the person working.
400

If the electrical cord any powered machine has been exposed or begins to fray the students are to do this before using the machine.

What is report the problem to the instructor and do not use the machine.

400
Short circuited equipment or overloaded electrical cables will cause this type of fire.
What is Class C
400
This color indicates dangerous parts of equipment where body parts can become caught in machinery.
What is orange
500

TRUE/FALSE: Wearing gloves in the shop is an acceptable way of protecting your hands when working.

What is FALSE. Gloves have the potential of giving you a loose grip on the tool you are working with and can get caught in the machines.

500

This should be done if a fellow student shows up to shop class under the influence of drugs or alcohol to ensure their safety.

What is, notify the instructor.

500

When should saw blades be changed?

What is when the blade cuts slower and/or burns the material when being used.

500

Class K fires involve these items and are not normally associated with shop fires.

What is cooking oils and fats.

500
OSHA dictates that equipment be marked with this color if it is in need of or currently under repair.
What is blue