Sculpting Procedures
Done for control and between design line changes
Sectioning
Protruding bone located below the crest area in back of the head
Occipital
Develops at the form line since all lengths fall to the same level
Weight
Use an EPA registered disinfectant solution, wipe or spray. Do not immerse.
Shears
Wear single use gloves as needed
Personal care
Generally Upright
Head position
Area above the crest area
Interior
Rectangle
Shape
Remove hair and debris, preclean in soap and water. Immerse in an approved EPA-registered disinfectant solution.
Combs/Brushes
Be sure the cape stays in place and arms underneath
Client care
Horizontal and Diagonal
Part
Top or highest point of head
Apex
Unactivated
Texture
Remove hair, wash in washing machine with soap after each use.
Cape (plastic and cloth)
Ensure electrical equipment, plugs, cables are in good condition and turn off after each use.
Salon care
Natural fall and 0 degree
Project
Area in the upper back and on top of the crest area, begins where the top of head begins to curve downward
Crown
Shorter exterior progressing to longer interior
Structure
Cannot be disinfected
Neck strip
Wash hands and dry thoroughly with a single-use towel
Personal
Horizontal, diagonal, and both straight and curved combinations; all lengths are distributed to a stationary...
Design Line
Area below the crest area
Exterior
Color code
Blue
Discard disposable blades after each use in a puncture proof container. Immerse in disinfectant solution.
Razor
Disinfect all tools after each use.
Salon care